Wiegmann
Wiegmann N1C060604 Enclosure Gray ANSI 61 14 ga 6x6x4 in
A carbon-steel NEMA 1 wall-mount enclosure with hinged solid cover, 1/4-turn latch and grounding provisions
- TypeBus Plugs
- MaterialHAWA
- NEMA 1 rating protects indoor components from dust
- Carbon steel body with ANSI 61 powder coat resists corrosion
- 14 gauge thickness adds structural rigidity
- Hinged cover with 1/4-turn latch enables quick access
- CSA and cULus certifications confirm safety compliance
Compact Steel Enclosure for Indoor Wiring
The Wiegmann N1C060604 is a NEMA 1 rated carbon steel enclosure designed to house circuit breakers and line protection devices in dry indoor locations. Its 14 gauge construction and ANSI 61 gray powder coat finish provide durable protection for electrical components in commercial or light industrial settings. The solid hinged cover secures with a flush mounted quarter turn latch for quick access during maintenance. This unit suits installers needing a small wall mounted junction box with grounding provisions.
Simple Wall Mount with Quarter Turn Access
Mounting holes on the rear allow direct attachment to flat surfaces without additional brackets. The hinged cover swings open on a fixed pin and locks closed with a single quarter turn latch that operates by hand or screwdriver. No tools are required for routine access, reducing service time on live panels. The flush latch design prevents snagging on nearby conduit or wiring. Installers should verify that the 3.88 inch usable depth accommodates their specific breakers and terminal blocks before mounting.
Six Inch Cube with Limited Internal Depth
The enclosure measures six inches high by six inches wide with a four inch overall depth, yielding a 3.88 inch usable opening depth for component mounting. This capacity fits small DIN rail assemblies, terminal strips or a single compact breaker with modest wiring room. The interior panel 1ZHF9 provides a dedicated mounting surface for DIN rail or direct device attachment. Builders needing deeper wire bending space or multiple pole breakers should consider larger enclosures as this unit reaches its limit quickly with larger cables.
Highlights
- NEMA 1 rating protects indoor components from dust
- Carbon steel body with ANSI 61 powder coat resists corrosion
- 14 gauge thickness adds structural rigidity
- Hinged cover with 1/4-turn latch enables quick access
- CSA and cULus certifications confirm safety compliance
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
How do I confirm the enclosure is properly grounded after mounting it?
Use the grounding provisions built into the carbon-steel body and verify continuity between the enclosure and your ground conductor with a multimeter.
What comes in the box and what must I source separately?
The enclosure ships with the 1/4-turn latch cover, mounting holes pre-drilled and the interior panel 1ZHF9; you must supply circuit breakers, wiring and mounting hardware.
Which finish and gauge combination should I select for a standard indoor installation?
Choose the ANSI 61 gray powder-coated version in 14-gauge carbon steel, which carries CSA, cULus and UL listings for general-purpose use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
