Wiegmann
Wiegmann N1C 81006 line protection 10x8x6 14 ga ANSI 61
Wall-mount carbon-steel enclosure with hinged solid cover, 1/4-turn latch, grounding provisions and ANSI 61 grey finish
- TypeBus Plugs
- MaterialHAWA
- Wall-mount ready with pre-drilled holes
- Hinged cover secured by 1/4-turn latch
- 14-gauge carbon steel rated NEMA 1
- ANSI 61 gray powder-coat finish
- UL listed, cULus and CSA certified
Wiegmann N1C Wall-Mount Enclosure
The Wiegmann N1C 81006 is a carbon-steel wall-mount enclosure rated NEMA 1 for indoor line protection. It measures 10 in high by 8 in wide by 6 in deep and carries a gray ANSI 61 polyester powder finish. A 14 ga steel body and 1/4-turn latch provide secure closure and grounding provisions.
Indoor Electrical Builders Only
This enclosure suits installers who need a compact, grounded housing for circuit breakers or bus plugs in dry indoor locations. It does not suit projects that require outdoor-rated protection, larger internal volume, or a different mounting orientation.
10 in Height Decides Fit
The 10 in overall height sets the maximum usable opening depth at 5.88 in and determines whether the included 3A904 interior panel accommodates your component layout. Verify this dimension against your bus-plug or breaker assembly before ordering.
Highlights
- Wall-mount ready with pre-drilled holes
- Hinged cover secured by 1/4-turn latch
- 14-gauge carbon steel rated NEMA 1
- ANSI 61 gray powder-coat finish
- UL listed, cULus and CSA certified
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
What does the 10-inch height mean once the enclosure is mounted on a wall?
The 10-inch height gives the overall vertical size of the carbon-steel cabinet, so you can plan clearance above and below the hinged cover when it is wall-mounted.
How does the cULus and CSA certification cap what circuits can be run inside?
The cULus and CSA listings confirm the enclosure meets North American safety standards for indoor use, limiting installations to the voltage and current ratings of the components you fit inside.
What does the 14-gauge steel and 5.88-inch usable depth require for mounting hardware?
The 14-gauge carbon-steel body with 5.88-inch usable depth uses the pre-drilled mounting holes and a 1/4-turn latch, so standard lag bolts or screws secure it to the wall.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
