Wiegmann
Wiegmann N12202006 NEMA 12 13 20x20x6 line protection
A NEMA 12 and 13 rated carbon-steel wall-mount enclosure measuring 20 by 20 by 6 inches with a hinged solid cover, clamps and a poured-in-place gasket
- NEMA 12 and 13 ratings protect internal components from dust and water ingress
- 14 gauge carbon steel construction provides rigid structural strength for industrial environments
- Hinged solid cover with clamps allows quick access while maintaining a secure seal
- Poured-in-place polyurethane gasket creates a continuous barrier against contaminants
- External mounting feet and hasp for padlocking simplify wall installation and physical security
Industrial enclosure for electrical equipment
The Wiegmann N12202006 is a NEMA 12 and 13 rated wall-mount enclosure built from 14-gauge carbon steel with a painted gray finish. It measures 20.0 in high by 20.0 in wide by 6.0 in deep and provides a usable opening depth of 5.88 in for component installation. The solid hinged cover secures with clamps and includes a hasp and staple for padlocking. It is designed for indoor use where protection against dust, dirt and non-corrosive liquids is required.
Mounting and integration requirements
External mounting feet allow direct wall attachment without additional brackets. The seamless polyurethane poured-in-place gasket maintains the environmental seal around the perimeter. A 3A922 interior panel is included for mounting DIN rail, terminal blocks or other control devices. The clamps operate without tools, enabling quick access for wiring changes or inspection while the enclosure remains fixed to the wall.
Sustained environmental performance
The carbon steel construction and painted finish resist corrosion in humid or wash-down conditions typical of NEMA 13 environments. The poured gasket retains its seal over long periods without compression set, maintaining the rated ingress protection through thermal cycling. CSA certification and cULus listing confirm compliance with applicable safety standards for continuous service in industrial control applications.
Highlights
- NEMA 12 and 13 ratings protect internal components from dust and water ingress
- 14 gauge carbon steel construction provides rigid structural strength for industrial environments
- Hinged solid cover with clamps allows quick access while maintaining a secure seal
- Poured-in-place polyurethane gasket creates a continuous barrier against contaminants
- External mounting feet and hasp for padlocking simplify wall installation and physical security
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
What is the usable internal depth for mounting components in the Wiegmann N12202006 enclosure?
The usable opening depth is 5.88 inches, measured from the inner door surface to the back panel.
How much heat can the carbon steel body dissipate when the enclosure is sealed for continuous operation?
The 14-gauge carbon steel construction with a painted finish provides passive heat dissipation; no active cooling or thermal ratings are specified.
Which interior panel is required to mount breakers or terminal blocks inside this NEMA 12/13 enclosure?
The compatible interior panel is model 3A922, sold separately, and fits the 20 by 20 inch internal dimensions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
