Wiegmann
Wiegmann A101204 line protection enclosure 10x12x4 in gray ANSI 61 powder coated carbon steel
A gray carbon-steel enclosure measuring 10 by 12 by 4 inches with ANSI 61 powder coating, clamps, mounting holes and a 3.88-inch usable depth for line protection
- TypeBus Plugs
- NEMA 1 rated enclosure protects indoor circuits
- 16 gauge carbon steel construction resists impact
- ANSI 61 powder coating prevents corrosion
- Hinged cover with clamps allows quick access
- CSA, cULus and UL listed for code compliance
Enclosure for line protection
The Wiegmann A101204 is a carbon steel enclosure rated NEMA 1 for indoor line protection. It measures 10 in wide by 12 in high by 4 in deep with a 16 ga wall thickness. The gray ANSI 61 powder coated finish resists corrosion in standard industrial environments.
Hinged cover with clamp closure
A solid hinged cover secures with clamps for tool-free access during installation or maintenance. Mounting holes are provided for direct wall mounting. The usable opening depth is 3.88 in, so verify that internal components fit within this space before finalising the layout.
Check certifications and indoor rating
Confirm that CSA, cULus and UL Listed markings satisfy local code requirements for your project. This enclosure carries a NEMA 1 rating only; it is not suited for outdoor, wash-down or hazardous locations where higher ingress protection is required.
Highlights
- NEMA 1 rated enclosure protects indoor circuits
- 16 gauge carbon steel construction resists impact
- ANSI 61 powder coating prevents corrosion
- Hinged cover with clamps allows quick access
- CSA, cULus and UL listed for code compliance
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
Questions about this item
How can I confirm the enclosure meets its NEMA 1 rating after wall mounting?
Verify the hinged solid cover seals tightly against the ANSI 61 powder coated carbon steel body and that the clamps hold firm; the 16 ga steel and cULus / CSA certification indicate the construction matches the NEMA 1 indoor protection level.
What components are included with the A101204 and what must I source separately?
The unit supplies the 10 x 12 x 4 in gray enclosure with hinged cover, clamps and pre-drilled mounting holes; you must provide the bus plugs, internal DIN rail, terminal blocks and any wiring or breakers required for your circuit.
Which version of the A101204 should I select for a 10-inch wide, 12-inch high indoor installation?
The A101204 is a single NEMA 1 model with 10 in width, 12 in height, 4 in depth and 3.88 in usable opening depth; choose it when those exact dimensions and the ANSI 61 gray finish suit your indoor wall-mount application.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
