Wiegmann
Wiegmann 8×8×4 in Carbon Steel Enclosure Gray Screw Closure 16 ga NEMA 1
Wall-mount carbon-steel enclosure rated NEMA 1 with screw-on cover and ANSI 61 powder-coated finish
- TypeBus Plugs
- MaterialHAWA
- NEMA 1 rating protects indoor equipment
- 16 ga carbon steel resists impact damage
- ANSI 61 powder coat prevents corrosion
- Embossed mounting holes simplify wall installation
- Self-tapping screws included for quick assembly
Indoor Electrical Enclosure
The Wiegmann carbon-steel enclosure provides a NEMA 1 rated housing for indoor electrical components. It measures 8 inches high, 8 inches wide and 4 inches deep with a usable opening depth of 3.88 inches. The gray ANSI 61 powder-coated finish protects the 16 gauge steel body. Embossed mounting holes and included self-tapping screws simplify wall installation.
Selecting This Enclosure
This unit suits installers who need a listed, screw-cover box for dry indoor locations such as equipment rooms or control panels. It is not suitable for outdoor exposure, wash-down areas or any setting that demands a higher NEMA rating. Buyers requiring transparent covers, hinge mechanisms or larger internal volume should consider other enclosures.
Critical Specification
The single specification that decides fit is the NEMA 1 rating combined with the 3.88 inch usable opening depth. These two figures determine whether your components and wiring will fit and whether the enclosure meets the environmental requirements of the installation site.
Highlights
- NEMA 1 rating protects indoor equipment
- 16 ga carbon steel resists impact damage
- ANSI 61 powder coat prevents corrosion
- Embossed mounting holes simplify wall installation
- Self-tapping screws included for quick assembly
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
How can I confirm the enclosure meets its NEMA 1 rating once it is wall mounted?
Verify the ANSI 61 powder-coated finish is intact, the screw-on cover closes flush with the plated steel screws, and the embossed mounting holes align with your wall anchors for a secure seal.
What hardware is included and what must I supply for installation?
Self-tapping screws for the cover are included; you must provide wall-mounting fasteners and any conduit fittings for the knockouts.
Which gauge and usable depth suit a standard 16 ga carbon steel build?
The box is 16 ga carbon steel with a usable opening depth of 3.88 in, matching the SC series specification for general indoor protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
