Wheeler-Rex
Wheeler-Rex Hydraulic Pipe Cutter 2-6 in Cap 37 in 8700-9000 psi
Hydraulic pipe cutter for 2–6 in cast iron, tile and concrete pipe, chain squeeze action without rotation, 37 in length, 8700–9000 psi pressure, includes pump, hose and case
- TypeAngle, Pitch & Slope Locators
- Cuts 2–6 in cast iron with 8700–9000 psi hydraulic force
- 37 in overall length fits tight 2–3 in clearance gaps
- Chain squeezes and pops pipe without rotating around it
- Forged steel jaws and hardened chain handle concrete and tile mains
- Includes remote pump, hose and carrying case for immediate use
Pipe cutter for 2–6 in cast iron
The Wheeler-Rex hydraulic pipe cutter handles cast iron, tile and concrete pipe from 2 to 6 inches in diameter. It is built for utility crews and contractors who need to cut larger mains without rotating the tool around the pipe. Forged steel jaws and a hardened steel chain deliver the cutting force. The unit ships with a pump, hose and carrying case.
Fits tight trenches with 2–3 in clearance
The cutter only requires 2 to 3 inches of clearance around the pipe, so it works in narrow excavations where a rotary cutter cannot turn. A remote hydraulic pump supplies the pressure, keeping the power unit outside the trench. This arrangement frees up working space and reduces the weight the operator must manoeuvre in the cut zone.
Sustained cuts at 8700–9000 psi
The hydraulic system operates between 8700 and 9000 psi, squeezing the chain until the pipe pops rather than grinding through it. Oil capacity of 1 qt. supports repeated cycles without frequent top-ups. The 37 in overall length gives leverage for steady force during long cutting sessions on thick-walled mains.
Highlights
- Cuts 2–6 in cast iron with 8700–9000 psi hydraulic force
- 37 in overall length fits tight 2–3 in clearance gaps
- Chain squeezes and pops pipe without rotating around it
- Forged steel jaws and hardened chain handle concrete and tile mains
- Includes remote pump, hose and carrying case for immediate use
Specifications
| Brand | Wheeler-Rex |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What is the maximum pressure the hydraulic system reaches during a cut?
The cutter operates between 8700 and 9000 psi to squeeze and pop the pipe without rotating around it.
How much hydraulic oil does the system hold for continuous operation?
The reservoir holds 1 qt. of oil to supply the pump, hose and cutter during all-day use.
Which remote hydraulic pump is required to run this cutter?
The package includes the pump, hose and carrying case so no separate pump purchase is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
