Wheeler-Rex
Wheeler-Rex 9015 Plastic Beveler 1-1/2 to 12 in Cap Alum hand tool
Handheld plastic pipe beveler adjusts to cut 15-degree edges on 1-1/2 to 12 inch schedule 40 pipe
- TypeAngle, Pitch & Slope Locators
- Bevels plastic pipe up to 12 in diameter
- Factory-set 15-degree angle for consistent weld prep
- Schedule 40 compatible for standard wall thickness
- Lightweight aluminium frame reduces operator fatigue
- Easy-to-adjust mechanism speeds setup on site
Wheeler-Rex 9015 Plastic Beveler
The Wheeler-Rex 9015 is a lightweight handheld tool designed to create a consistent 15-degree bevel on plastic pipe. It accommodates pipe diameters from 1-1/2 inches up to 12 inches and works with Schedule 40 wall thickness. The aluminium construction keeps the tool easy to handle during on-site preparation work.
Check pipe size and material before ordering
Verify that the pipe you need to bevel falls within the 1-1/2 to 12 inch diameter range and is made of plastic compatible with Schedule 40 specifications. The tool is intended for pipe only and produces a fixed 15-degree angle, so confirm that this angle matches your joint requirements. No power source or additional accessories are required for operation.
Manual operation keeps heat and noise minimal
Because the beveler is hand-powered, it generates no motor noise, vibration or electrical draw during normal use. The aluminium body dissipates ambient temperature quickly and remains comfortable to hold for extended periods. There are no moving parts that require lubrication or cooling, so the tool stays ready for immediate use on the job site.
Highlights
- Bevels plastic pipe up to 12 in diameter
- Factory-set 15-degree angle for consistent weld prep
- Schedule 40 compatible for standard wall thickness
- Lightweight aluminium frame reduces operator fatigue
- Easy-to-adjust mechanism speeds setup on site
Specifications
| Brand | Wheeler-Rex |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What comes with the Wheeler-Rex 9015 plastic beveler and what must I buy separately?
The tool itself is supplied ready to use; no extra blades, handles or accessories are listed, so nothing additional is required to start beveling.
Which Wheeler-Rex 9015 version should I choose for my pipe size?
The single model covers 1-1/2 in to 12 in schedule 40 plastic pipe, so one tool handles the entire stated range.
What does the 15-degree bevel angle mean when I use the tool on a job site?
It produces a consistent 15-degree chamfer on the pipe end, suitable for standard solvent-weld or mechanical joint preparation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
