Wet Sounds
Wet Sounds WS-SUB 650 ES 6.5 Ported Subwoofer Enclosure
A 6.5-inch ported subwoofer enclosure delivers 45–250 Hz bass from a slim rotomolded housing with versatile mounting for boats, golf carts and UTVs
- TypeEnclosures
- Delivers deep bass down to 45 Hz
- Ported enclosure produces powerful low-frequency output
- Rotomolded housing withstands marine and off-road use
- Versatile mounting fits boats, golf carts, UTVs
- Quick-connect harness simplifies amplifier installation
Compact Marine Subwoofer Enclosure
The Wet Sounds WS-SUB 650 ES is a 6.5 ported subwoofer enclosure built for marine, golf cart and UTV use. Its rotomolded housing delivers bass from 45 to 250 Hz in a slim profile that fits boat cabins, consoles and under-seat storage areas. The loaded enclosure requires an external amplifier to operate.
Simple Wiring With Quick Connect Harness
Installation uses the supplied quick connect wiring harness for a fast, secure link to your amplifier. The single 4 ohm voice coil presents an easy load for most marine amplifiers. The rotomolded shell is rugged, but the ported tuning means the enclosure must stay sealed; any air leak around the woofer or port will reduce output and change the frequency response.
Verify Amplifier Power And Mounting Space
Confirm your amplifier can deliver 75 watts RMS into a 4 ohm load without exceeding 150 watts peak. Measure the available cavity against the enclosure dimensions of 14.25 by 5.25 by 9.75 inches to ensure the port has clearance. The unit weighs 6.6 pounds, so the mounting surface must support that weight under vibration.
Highlights
- Delivers deep bass down to 45 Hz
- Ported enclosure produces powerful low-frequency output
- Rotomolded housing withstands marine and off-road use
- Versatile mounting fits boats, golf carts, UTVs
- Quick-connect harness simplifies amplifier installation
Specifications
| Type | Enclosures |
|---|
Questions about this item
How can I verify the subwoofer is performing correctly after installation?
Play test tones and confirm clean output between 45 and 250 Hz with no distortion at your chosen volume level.
What items are included in the package and what must be purchased separately?
The loaded rotomolded enclosure with integrated wiring harness is included; an external amplifier and mounting hardware are required separately.
Which impedance version should I select to match my amplifier?
This model is a 4 ohm single-coil design rated at 75W RMS and 150W peak; choose an amplifier stable at 4 ohms within that power range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



