Wet Sounds
Wet Sounds WS-NMEA-TR NMEA 2000 Audio Controller Remote
A compact IPX7 marine remote controls power, source, volume, track and playback on an MC-20 via a NMEA 2000 network with a 17.75 in adaptor cable
- TypeAmplifier & Processor Remotes
- NMEA 2000 network control lets you manage audio from any helm station
- IPX7 marine rating withstands full water immersion for reliable offshore use
- Backlit keypad provides clear visibility of power, volume, source and track controls in darkness
- Compact 2.75 by 2.41 inch face fits a standard 2 inch mounting hole with 1.75 inch depth
- Included 17.75 inch adaptor cable connects directly to NMEA 2000 backbone via 4-pin Deutsch plug
Marine Audio Remote Control
The Wet Sounds WS-NMEA-TR is a compact, IPX7 rated marine remote designed to control an MC-20 media center over a NMEA 2000 network. It connects via an included 17.75 inch adapter cable with a 4-pin Deutsch connector. The unit mounts in a 2 inch diameter hole with a 1.75 inch mounting depth and features a backlit keypad for low-light visibility.
Suited for NMEA 2000 Helm Stations
This remote suits boat owners who want helm-level control of power, source, volume, track and play/pause functions without reaching the head unit. It is not for vessels lacking a NMEA 2000 backbone or those using media centers other than the MC-20. Buyers needing wireless or Bluetooth control should look elsewhere.
NMEA 2000 Network Compatibility
The single specification that decides fitment is the requirement for an existing NMEA 2000 network and a compatible Wet Sounds MC-20 media center. Without that specific network infrastructure and head unit, the remote cannot function. Verify your system matches this exact configuration before purchase.
Highlights
- NMEA 2000 network control lets you manage audio from any helm station
- IPX7 marine rating withstands full water immersion for reliable offshore use
- Backlit keypad provides clear visibility of power, volume, source and track controls in darkness
- Compact 2.75 by 2.41 inch face fits a standard 2 inch mounting hole with 1.75 inch depth
- Included 17.75 inch adaptor cable connects directly to NMEA 2000 backbone via 4-pin Deutsch plug
Specifications
| Type | Amplifier & Processor Remotes |
|---|
Questions about this item
What network standard does the WS-NMEA-TR remote use to communicate with the MC-20?
The remote communicates over the NMEA 2000 network, allowing full media control from any connected location on that bus.
What size mounting hole and depth are required to install the remote?
A 2" diameter hole and 1.75" of clearance behind the panel are needed for the remote face measuring 2.75" by 2.41".
How do you connect the remote to the NMEA 2000 network, and what cable is supplied?
Plug the included 17.75" adaptor cable into the remote's 4-pin Deutsch connector and then into a NMEA 2000 backbone drop; the moulded Deutsch-to-NMEA 2000 cable is supplied in the box.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



