We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black marine amplifier with silver trim and Wet Sounds branding, 14.63 by 8.52 by 3.08 inches

Wet Sounds

Wet Sounds SYN-DX-2.3HP car amplifier

SKU CH-38TW-T81KW

A marine-grade mono amplifier delivering 1,200 watts at four ohms with Class D circuitry and adjustable crossovers

  • TypeAmplifier
  • Amplifier Channels1
  • Delivers 1200W at 4 ohms bridged for maximum output
  • Class D circuitry packs extreme power into a compact 14.63 x 8.52 x 3.08 chassis
  • Thermal overload protection keeps the amp running safely under heavy loads
  • Adjustable 50 Hz to 250 KHz crossovers at 12dB/Octave tailor the signal precisely
  • Wide 0.2 V to 6.0 V input sensitivity matches virtually any source unit

Marine mono amplifier

The Wet Sounds SYN-DX-2.3HP is a single-channel marine amplifier built for extreme on-water environments. It uses Class D power-supply circuitry to deliver high output from a compact chassis measuring 14.63 x 8.52 x 3.08 inches. Thermal overload protection helps maintain reliability during extended high-power sessions. This unit targets boaters who need maximum bass authority for a single subwoofer.

Power and crossover limits

The amplifier produces 300W x 2 at 4 ohms, 600W x 2 at 2 ohms and 1200W x 1 at 4 ohms bridged. Frequency response spans 20 Hz to 20 KHz with 12 dB per octave crossovers adjustable from 50 Hz to 250 KHz for both low-pass and high-pass modes. Input sensitivity accepts signals from .2 V to 6.0 V, so integration with a wide range of source units is possible without external line drivers. Builders needing more than one independent channel or a different impedance load must look elsewhere.

Upgrade path

The SYN-DX-2.3HP replaces older marine amplifiers that lack Class D efficiency, thermal protection or flexible crossover ranges. The jump is worth it when a single subwoofer demands 1200 W bridged power and the installation space fits the stated chassis dimensions. Systems requiring multi-zone control or separate mid-range channels will not be served by this mono design.

Highlights

  • Delivers 1200W at 4 ohms bridged for maximum output
  • Class D circuitry packs extreme power into a compact 14.63 x 8.52 x 3.08 chassis
  • Thermal overload protection keeps the amp running safely under heavy loads
  • Adjustable 50 Hz to 250 KHz crossovers at 12dB/Octave tailor the signal precisely
  • Wide 0.2 V to 6.0 V input sensitivity matches virtually any source unit

Specifications

TypeAmplifier
Amplifier Channels1

Questions about this item

Which power rating matches my subwoofer setup?

The amplifier delivers 300W x 2 at 4 ohms, 600W x 2 at 2 ohms, and 1200W x 1 at 4 ohms bridged, so choose the figure that matches your subwoofer impedance and wiring.

What does the 1200W x 1 rating mean once installed?

That 1200W figure is the bridged mono output at 4 ohms, giving a single subwoofer the full power of both channels combined.

How does the crossover range cap the frequencies I can send to my subwoofer?

The low-pass and high-pass crossovers adjust from 50 Hz to 250 KHz at 12dB per octave, so you can limit the amplifier to the exact band your subwoofer needs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.