We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wet Sounds AR-AMP 2CH amplifier, compact metal chassis, black finish, plug-and-play harness visible

Wet Sounds

Wet Sounds AR-AMP 2CH car amplifier

SKU CH-YNVS-NNC1A

A two-channel amplifier built for plug-and-play expansion of the AR-5 Ranger roof system, adding REV8 or ICON 8 tower speakers with adjustable gain from .2 to 5.0 V.

  • TypeAmplifier
  • Amplifier Channels2
  • Plug-and-play expansion for AR-5 Ranger roof systems
  • Add REV8 or ICON 8 tower speakers with included 8-pin harness
  • 2-channel stable operation, bridgeable to 4 channels
  • Adjustable bass boost up to 16 dB and crossover 40 Hz to 400 Hz
  • Gain sensitivity range from 0.2 V to 5.0 V for flexible tuning

System Expansion

The Wet Sounds AR-AMP 2CH is a two-channel amplifier built to integrate directly with the AR-5 Ranger Roof Audio System. It targets owners of that specific roof system who want to add a pair of REV8 or ICON 8 tower speakers. The unit is constructed to withstand the elements and uses a plug-and-play harness for straightforward installation.

Power Configuration

The amplifier runs stable at two ohms per channel and can be bridged to four ohms without a VU meter. This headroom supports the additional speaker pair designated for the roof system. It runs out when the load drops below the rated two-ohm stability or when bridged into an impedance lower than four ohms.

Signal Tuning

The gain and sensitivity adjustment spans 0.2V to 5.0V, setting the input stage for the source signal. A variable crossover operates from 40Hz to 400Hz with high, low, and full pass options. Bass boost is adjustable up to 16 dB. All controls are accessed by removing the cover.

Highlights

  • Plug-and-play expansion for AR-5 Ranger roof systems
  • Add REV8 or ICON 8 tower speakers with included 8-pin harness
  • 2-channel stable operation, bridgeable to 4 channels
  • Adjustable bass boost up to 16 dB and crossover 40 Hz to 400 Hz
  • Gain sensitivity range from 0.2 V to 5.0 V for flexible tuning

Specifications

TypeAmplifier
Amplifier Channels2

Questions about this item

Will the AR-AMP 2CH plug straight into the wiring of my existing Wet Sounds AR-5 Ranger roof system?

Yes, it is designed as a plug-and-play expansion for the AR-5 Ranger Crew roof system and includes an additional 8-pin wire harness for direct connection.

How can I confirm the amplifier is delivering clean output to my REV8 or ICON 8 tower speakers after installation?

Remove the cover to access the gain control and set sensitivity between 0.2V and 5.0V, then use the crossover switch to select Hi, Low or Full range while listening for distortion-free output.

What comes in the box and what extra parts are needed to add a pair of tower speakers?

The amplifier and an 8-pin wire harness are included; you must supply the REV8 or ICON 8 tower speakers, speaker wire and a suitable power and ground cable for the 2-channel amp.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.