Westward
Westward Welding Blanket Fiberglass 10 ft 6 ft 18 oz/sq yd
Fiberglass welding blanket measuring 10 ft by 6 ft with 18 oz/sq yd weight withstands 1,000 °F and meets FM Approved and NFPA701 standards
- TypeWelding Protection
- Handles 1,000 °F heat with fiberglass construction
- 10 ft by 6 ft coverage protects large work areas
- FM Approved and NFPA 701 rated for fire safety
- Brass grommets every 24 in allow secure fastening
- Uncoated 18 oz/sq yd material resists sparks and splatter
What this blanket protects
The ZORO SELECT welding blanket uses uncoated fiberglass rated to one thousand degrees Fahrenheit. It measures ten feet by six feet and weighs eighteen ounces per square yard with a thickness of zero point zero four inches. Brass grommets on each corner spaced twenty four inches apart allow secure fastening for light duty shielding during welding or cutting work.
How it holds up during extended use
The material meets FM Approved and NFPA seven zero one standards for flame resistance. Because the fiberglass is uncoated it does not degrade from coating breakdown under repeated high heat exposure. Light duty rating means it is intended for intermittent spark and spatter protection rather than continuous heavy industrial curtains.
What to verify before ordering
Check that the ten by six foot dimensions cover the required work zone and that grommet spacing matches your mounting points. The blanket carries a California Proposition sixty five warning for cancer and reproductive harm. Confirm local regulations allow uncoated fiberglass use in your facility.
Highlights
- Handles 1,000 °F heat with fiberglass construction
- 10 ft by 6 ft coverage protects large work areas
- FM Approved and NFPA 701 rated for fire safety
- Brass grommets every 24 in allow secure fastening
- Uncoated 18 oz/sq yd material resists sparks and splatter
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Welding Protection |
Questions about this item
How much heat can the 18 oz/sq yd fiberglass blanket withstand during all-day welding?
The blanket is rated for a maximum temperature of 1,000 degrees F, making it suitable for continuous high-heat welding operations.
What mounting points does the 10 ft by 6 ft blanket provide for hanging?
It has two brass grommets on each corner with 4/5 inch holes spaced 24 inches apart for secure fastening.
Will the FM Approved and NFPA 701 rated blanket safely cover older steel work surfaces?
Yes, the uncoated tan fiberglass material meets FM Approved and NFPA 701 standards for fire protection over existing metal tables.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
