Westward
Westward GGS_50703 Drawer Slides 10 in 80 lb 1PK
A pair of 10 in ball-bearing drawer slides with auto-return supports 80 lb loads and extends to 21 in for tool chests
- Smooth auto-return keeps drawers closed with a gentle push
- Ball-bearing construction handles 80 lb per pair without sag
- 10 in closed length extends to 21 in for full access
- Mounting hardware included speeds installation on tool chests
- Compatible with Grainger 32H878, 32H879 and 32H880 for direct replacement
Drawer Slides 10 in 80 lb
These ball-bearing drawer slides extend to 21 in from a 10 in closed length and support 80 lb per pair. They feature an auto-return mechanism and include mounting hardware for tool-chest installation. One pair is supplied in the pack.
Compatibility and load limits
The slides are compatible with Grainger part numbers 32H878, 32H879 and 32H880 and manufacturer model AC726901. They are designed for tool chests and similar storage units where the drawer depth matches the 10 in closed dimension. Loads above 80 lb per pair exceed the rated capacity.
Capacity and headroom
An 80 lb rating per pair handles typical tool-chest drawers loaded with hand tools and small power equipment. The 21 in open travel gives full access to the drawer interior. Heavier industrial loads or wider drawers that require a higher weight rating fall outside the design envelope.
Highlights
- Smooth auto-return keeps drawers closed with a gentle push
- Ball-bearing construction handles 80 lb per pair without sag
- 10 in closed length extends to 21 in for full access
- Mounting hardware included speeds installation on tool chests
- Compatible with Grainger 32H878, 32H879 and 32H880 for direct replacement
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
Should I pick the 10 in closed length or the 21 in open length for my tool chest?
The 10 in figure is the closed length; the slide extends to 21 in when fully open, so choose based on the depth of your drawer cavity.
What does the 80 lb load capacity mean once the slides are installed in a tool chest?
Each pair supports up to 80 lb of evenly distributed drawer weight when mounted according to the included hardware instructions.
Are these ball-bearing slides compatible with the Grainger 32H878, 32H879 and 32H880 part numbers?
Yes, the manufacturer lists compatibility with Grainger part numbers 32H878, 32H879 and 32H880 as well as model AC726901.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
