Westward
Westward 53YV86 3/8" Drive T25 Torx Socket Bit 6 Pt
A 3/8 inch drive T25 Torx socket bit made from alloy steel with a six-point design and full polish finish
- Typesocket
- Alloy steel construction resists wear and rounding
- 3/8 inch drive fits common ratchets and extensions
- T25 Torx tip engages six-point fasteners securely
- Full polish finish protects against corrosion
- Meets Camcar TXF-702 dimensional standard
Westward 53YV86 T25 Torx Socket Bit
This Westward 53YV86 socket bit fits a 3/8 inch drive and carries a T25 Torx tip with six points. It is made from alloy steel with a full polish finish and meets Camcar TXF-702 standards. The overall length is 1-13/16 inches and the insert length is 7/8 inches. Mechanics and technicians who need a standard-depth Torx bit for routine fastening will find it suitable.
Installation and common issues
The bit drops into any 3/8 inch drive ratchet or extension and locks with the standard ball detent. Apply steady torque to avoid cam-out; the six-point Torx profile reduces rounding but excessive force can still damage the fastener head. If the bit feels loose, check the drive square for wear before continuing.
Check your setup before ordering
Verify that your ratchet or driver accepts a 3/8 inch drive socket and that the fastener requires a T25 Torx tip. Confirm you need a standard socket depth rather than a deep or impact-rated version. This bit is not designed for powered impact tools and may fracture under hammer use. Buyers who need a different drive size, tip size or impact-rated construction should look elsewhere.
Highlights
- Alloy steel construction resists wear and rounding
- 3/8 inch drive fits common ratchets and extensions
- T25 Torx tip engages six-point fasteners securely
- Full polish finish protects against corrosion
- Meets Camcar TXF-702 dimensional standard
Specifications
| Brand | WESTWARD |
|---|---|
| Type | socket |
Questions about this item
How do I confirm the Westward 53YV86 socket bit is engaging correctly after setup?
The bit should seat fully in the T25 fastener with all six points contacting the walls, and the 3/8" drive square must lock securely into your ratchet without play.
What comes with the Westward 53YV86 and what must I supply?
The package contains the single alloy-steel T25 Torx socket bit; you provide the 3/8" drive ratchet or breaker bar and any extension or adapter you need.
Which Westward 53YV86 variant should I select for a standard-depth T25 job?
This model is the standard-depth, 6-point T25 bit with a 1-13/16" overall length and 7/8" insert length, matching Camcar TXF-702 dimensions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
