We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten stainless steel grease fittings with 65 degree angled heads

Westward

Westward 52PA21 Grease Fitting 65 Deg SS 55/64 in PK10

SKU CH-HHPC-PSCC7

Pack of ten stainless-steel grease fittings with a 65-degree head angle, 1/8"-27 PTF threads, 55/64 in overall length and a 5,000 psi rating

  • Stainless steel resists corrosion in harsh environments
  • 65-degree angle reaches fittings in tight spaces
  • 1/8-27 PTF threads match common lubrication ports
  • 5,000 psi rating handles high-pressure grease guns
  • Pack of 10 keeps inventory stocked for maintenance tasks

Grease Fitting Pack for Lubrication Points

This pack contains ten stainless steel grease fittings built to the SAE J-534-C standard. They suit maintenance technicians and fleet operators who need reliable lubrication points on heavy equipment or commercial vehicles. Each fitting handles up to 5,000 psi for demanding service intervals.

Straightforward Thread-In Installation

The 1/8 in. -27 PTF threads engage directly into matching ports without special tools. Stainless steel construction resists cross-threading and corrosion better than plated carbon steel. The 65-degree head angle clears nearby obstacles, but verify port orientation before tightening to avoid binding the grease gun coupler.

Check Port Thread and Clearance First

Confirm the host component uses 1/8 in. -27 PTF threads; other thread forms will not seal. Measure the available swing radius for the 55/64 in. overall length and 65-degree offset to ensure the grease gun can connect. The unfinished stainless surface may require thread sealant per your shop practice.

Highlights

  • Stainless steel resists corrosion in harsh environments
  • 65-degree angle reaches fittings in tight spaces
  • 1/8-27 PTF threads match common lubrication ports
  • 5,000 psi rating handles high-pressure grease guns
  • Pack of 10 keeps inventory stocked for maintenance tasks

Specifications

BrandWESTWARD

Questions about this item

How can I verify the 65 degree angle grease fittings are working after installation?

Apply grease through each fitting using a grease gun rated for 5,000 psi; smooth flow into the bearing or joint without back-pressure confirms the 1/8 in.-27 PTF threads and 65.0 degree head angle are seated correctly.

What comes in the package and what must I supply separately?

The box contains ten stainless-steel grease fittings measuring 55/64 in overall length; you must provide a compatible grease gun and grease.

Which pack size should I choose for a fleet using 1/8 in.-27 PTF threads?

The only version offered is the ten-piece pack (PK10), which matches the SAE J-534-C specification for that thread size.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.