We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten stainless steel 45-degree M8×1.0mm grease fittings

Westward

Westward 52PA10 45° Stainless Steel Grease Fitting M8×1.0mm PK10

SKU CH-TBF3-1Z6EN

Stainless steel 45° metric grease fittings rated to 5,000 psi, DIN 71412, pack of 10

  • 45° angle eases access in tight spaces
  • Stainless steel body resists corrosion and wear
  • M8×1.0 mm metric thread fits compatible ports
  • 5,000 psi rating handles high-pressure lubrication
  • Pack of 10 fittings covers multiple service points

Grease Fitting 45 Degree M8

Westward 52PA10 fittings are 45 degree stainless steel grease nipples with M8 1.00 mm metric threads. Each pack contains ten pieces finished unfinished and built to meet DIN 71412. The 53/64 in overall length suits standard grease gun couplers. Maximum working pressure is 5 000 psi for heavy duty lubrication tasks.

Suits Metric M8 Ports

Mechanics and maintenance teams with metric M8 1.00 mm ports will find these fittings a direct fit. The 45 degree head angle eases access on angled or recessed zerks. Buyers needing straight head angles should look at alternative fitting styles. Shops requiring larger thread sizes or different pitch must source other parts.

5 000 psi Pressure Rating

The 5 000 psi maximum pressure rating is the single figure that decides suitability for high pressure lubrication systems. Systems operating above this limit require fittings with a higher rating. At or below this pressure the stainless steel construction resists corrosion and thread deformation. Confirm your system pressure before installation.

Highlights

  • 45° angle eases access in tight spaces
  • Stainless steel body resists corrosion and wear
  • M8×1.0 mm metric thread fits compatible ports
  • 5,000 psi rating handles high-pressure lubrication
  • Pack of 10 fittings covers multiple service points

Specifications

BrandWESTWARD

Questions about this item

Will the M8×1.0 mm thread on these 45° fittings handle the 5 000 psi rating under continuous pumping?

Yes, each stainless-steel fitting meets DIN 71412 and is rated for 5 000 psi maximum pressure.

Do the stainless-steel fittings get hot or noisy when grease is forced through at 5 000 psi all day?

They are passive metal components with no moving parts, so they generate no noise and negligible heat during use.

What thread must the equipment already have for these 10 fittings to install correctly?

The host component needs an M8×1.0 mm metric female thread to accept the 45° grease fitting.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.