We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten zinc-plated steel grease fittings with 65-degree angled heads and 1/8-27 PTF threads

Westward

Westward 52NZ96 Grease Fitting 65 Deg Steel 1-13/16in PK10

SKU CH-PS6Z-Q5SNS

A pack of ten zinc-plated steel grease fittings with a 65-degree angle, 1/8"-27 PTF threads and a 5,000 psi rating

  • 65-degree angle reaches tight lubrication points easily
  • Steel construction with zinc-plated finish resists corrosion
  • 1/8 in.-27 PTF threads fit standard grease guns
  • Rated to 5,000 psi for high-pressure applications
  • Pack of 10 fittings keeps inventory stocked

Grease Fitting Specifications

This Westward grease fitting is a standard steel component with a zinc-plated finish for corrosion resistance. It features a 1/8 inch -27 PTF thread and an overall length of 1 13/16 inches. The fitting is rated for a maximum pressure of 5,000 psi and meets SAE J-534-C standards. It is sold in a package quantity of 10.

Ideal for High-Pressure Lubrication

Mechanics maintaining heavy equipment or automotive systems requiring SAE compliant fittings will find this suitable. The 90-degree head angle allows access in tight spaces where straight fittings cannot reach. Buyers needing a 65-degree head angle or a different thread specification should look at alternative fittings. Those requiring stainless steel construction or a different thread type will need another product.

Straightforward Thread Installation

Installation involves threading the 1/8 inch PTF fitting into a compatible port using appropriate tools. The zinc-plated steel construction resists cross-threading when aligned correctly. A common issue occurs if the mating port threads are damaged or contaminated, preventing a proper seal at high pressure. Over-tightening can strip the softer port material or damage the fitting head.

Highlights

  • 65-degree angle reaches tight lubrication points easily
  • Steel construction with zinc-plated finish resists corrosion
  • 1/8 in.-27 PTF threads fit standard grease guns
  • Rated to 5,000 psi for high-pressure applications
  • Pack of 10 fittings keeps inventory stocked

Specifications

BrandWESTWARD

Questions about this item

What thread size must my grease gun or equipment have to accept these 1/8 in. -27 PTF fittings?

The fittings use a 1/8 in. -27 PTF thread, so the mating port on your gun or machine must match that exact size and thread type.

Will the 65-degree head angle on these fittings clear the same space as the 90-degree angle listed in the specs?

The spec sheet lists a 90.0-degree head angle; the 65-degree reference in the model name differs, so verify which angle your access point requires before installing.

How can I confirm the fittings are seated to handle the rated 5,000 psi after installation?

Torque each fitting to the equipment manufacturer's specification, then pressurize the system and check for leaks at the zinc-plated steel joint.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.