We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of five straight zinc-plated steel grease fittings 29/32 in 3/8-18 PTF

Westward

Westward 52NZ94 Grease Fitting Straight Steel 29/32 in 3/8-18 PTF PK5

SKU CH-0EX4-9VYR6

Pack of five straight zinc-plated steel grease fittings with 3/8-18 PTF threads and 29/32 inch length rated to 5,000 psi

  • Straight design simplifies access in tight spaces
  • Zinc-plated steel resists corrosion for longer service life
  • 5,000 psi rating handles demanding lubrication tasks
  • 3/8-18 PTF threads match common equipment ports
  • Pack of five ensures spares are on hand

Grease Fitting Straight Steel 29/32 in

This pack contains five straight grease fittings made from zinc-plated steel. Each fitting uses a 3/8-18 PTF thread and measures 29/32 in overall length. They suit standard lubrication points on automotive and industrial equipment.

Sustained Pressure Rating 5000 psi

The fittings are rated to a maximum pressure of 5000 psi for continuous grease delivery. The steel body and zinc plating resist deformation and corrosion during extended use. This rating supports reliable flow through high-pressure grease guns without leakage.

Thread Installation 3/8-18 PTF

Installation requires a matching 3/8-18 PTF port; the straight head allows direct access but offers no angular offset. Cross-threading damages the tapered threads and causes leaks, so start by hand before using a wrench. Verify the port specification before fitting to avoid mismatched threads.

Highlights

  • Straight design simplifies access in tight spaces
  • Zinc-plated steel resists corrosion for longer service life
  • 5,000 psi rating handles demanding lubrication tasks
  • 3/8-18 PTF threads match common equipment ports
  • Pack of five ensures spares are on hand

Specifications

BrandWESTWARD

Questions about this item

Will the 5,000 psi rating hold without leaks or excess heat during continuous daily greasing?

The fittings are rated for 5,000 psi maximum pressure. Steel construction with zinc-plated finish resists corrosion under normal shop conditions. No heat is generated by the fitting itself; heat depends on the pump and grease viscosity.

What thread must my grease gun or hose end have to accept these 3/8-18 PTF fittings?

Your gun or hose needs a matching 3/8 in.-18 PTF female thread. The fittings are straight with a standard head angle and 29/32 in overall length. They are sold in a pack of five.

Can I screw these straight 29/32 in fittings into older equipment that uses 3/8-18 PTF ports?

Yes. The 3/8-18 PTF thread is a common taper pipe thread used on many older machines. The straight design and 29/32 in length fit standard port depths. Verify port condition before installation.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.