We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of ten zinc-plated steel grease fittings, 65 degree angle, 1/8-27 PTF threads

Westward

Westward 52NZ74 65 Deg Steel Fitting 1/8-27 PTF 1-49/64" PK10

SKU CH-4PTK-6FM32

Pack of ten zinc-plated steel grease fittings with 1/8-27 PTF threads and 5,000 psi rating

  • Steel construction resists wear in demanding jobs
  • Zinc-plated finish protects against corrosion over time
  • 65-degree angle routes grease into tight spaces
  • 1/8-27 PTF thread fits standard lubrication points
  • SAE J-534-C compliance confirms quality standards

Steel grease fitting for 1/8-27 PTF threads

This pack supplies ten zinc-plated steel fittings with a 65-degree head angle and an overall length of 1 49/64 inches. They meet SAE J-534-C and are rated for 5,000 psi maximum pressure. The straight-thread design suits standard lubrication points on automotive and industrial equipment. Mechanics and maintenance crews can keep a ready stock for routine servicing.

Thermals noise and power draw in normal use

These are passive metal components with no moving parts, so they generate no heat, produce no noise and draw no electrical power during operation. The zinc plating resists corrosion in typical workshop environments. Installation requires only a wrench on the 1/8-27 PTF thread, adding negligible load to the lubrication system.

Upgrades from worn or damaged straight fittings

The 65-degree angle improves access on tight or recessed grease ports where a straight fitting cannot be reached. The jump is worth it when clearance around the port prevents a standard straight fitting from seating properly. Buyers who need a different thread size or a straight head angle should look elsewhere.

Highlights

  • Steel construction resists wear in demanding jobs
  • Zinc-plated finish protects against corrosion over time
  • 65-degree angle routes grease into tight spaces
  • 1/8-27 PTF thread fits standard lubrication points
  • SAE J-534-C compliance confirms quality standards

Specifications

BrandWESTWARD

Questions about this item

How do I install the 1/8-27 PTF thread on this Westward 52NZ74 fitting?

Thread the 1/8-27 PTF end into the matching port by hand, then tighten with a wrench until the zinc-plated steel seats firmly; the step people miss is starting it straight to avoid cross-threading the tapered pipe thread.

What maintenance will these 65-degree steel fittings need over time?

Inspect the zinc-plated finish for corrosion and replace any fitting that shows leakage or thread damage; the SAE J-534-C rating means the 5,000 psi limit stays valid only while the steel body and seal remain intact.

What is the first limit reached when these fittings see sustained 5,000 psi pressure?

The 5,000 psi maximum pressure rating is the design ceiling; continuous operation at that level will stress the steel threads and zinc plating before any other factor becomes critical.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.