We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten zinc-plated steel grease fittings with 45-degree heads and M8x1mm metric threads

Westward

Westward 52NZ63 Fitting 45 Deg M8x1mm PK10

SKU CH-334E-TKBCT

Pack of ten 45-degree M8×1.00 mm zinc-plated steel grease fittings rated to 5,000 psi and meeting DIN 71412

  • 45-degree angle eases access in tight spots
  • M8×1.00 mm metric thread fits compatible ports
  • Zinc-plated steel resists corrosion
  • Rated to 5,000 psi for high-pressure use
  • Pack of 10 fittings covers multiple jobs

Grease fitting 45-degree M8x1mm

This Westward grease fitting uses a 45-degree head angle and an M8x1.00 mm metric thread for lubrication points that need an angled approach. The steel body carries a zinc-plated finish and meets DIN 71412 requirements. Each pack contains ten fittings rated to 5,000 psi maximum pressure.

Suited for metric-thread maintenance

Mechanics and technicians who service equipment with M8x1.00 mm ports will find the 45-degree angle useful where straight fittings cannot reach. Buyers needing a different thread size, a straight head, or a larger package quantity should look elsewhere.

Ten-pack capacity for routine service

A single pack supplies ten fittings, enough for several machines or a scheduled relubrication round. The 5,000 psi rating covers most hand-pump and pneumatic grease guns, while the 7/8 in overall length fits standard access holes. Very high-volume shops or applications above the rated pressure will need additional packs or higher-rated hardware.

Highlights

  • 45-degree angle eases access in tight spots
  • M8×1.00 mm metric thread fits compatible ports
  • Zinc-plated steel resists corrosion
  • Rated to 5,000 psi for high-pressure use
  • Pack of 10 fittings covers multiple jobs

Specifications

BrandWESTWARD

Questions about this item

What thread size must the existing grease port have to accept the M8x1mm fittings?

The port must be metric M8 with a 1.00 mm pitch so the 45-degree fittings thread in correctly.

Can the 5,000 psi rated steel fittings stay in place when the rest of the lubrication line runs at lower pressure?

Yes, the zinc-plated steel fittings are rated to 5,000 psi and will handle any lower system pressure without issue.

How can I confirm the ten-pack meets the DIN 71412 standard after installation?

Each fitting is manufactured to meet or exceed DIN 71412, so correct thread engagement and leak-free operation at up to 5,000 psi confirm compliance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.