Westward
Westward 52NZ28 Grease Fitting Straight Steel 5/8in PK10
Straight steel grease fittings with 1/4-28 SAE-LT threads, zinc-plated finish, 5/8in length, 5,000 psi rating, SAE J-534-C compliant, pack of 10
- Straight head angle simplifies access in tight spots
- Zinc-plated steel resists corrosion for longer service life
- SAE J-534-C compliance confirms reliable pressure performance
- 5000 psi rating handles demanding lubrication tasks
- Pack of 10 fittings keeps maintenance stocked
Westward 52NZ28 Grease Fitting Pack
This pack contains ten straight steel grease fittings manufactured by Westward. Each fitting features a zinc-plated finish for corrosion resistance in shop environments. They are designed for standard lubrication points on machinery and automotive equipment. The fittings are supplied new in a convenient package quantity of ten.
Capacity and Pressure Rating
Each fitting has an overall length of 5/8 in and a thread size of 1/4 In.-28 SAE-LT. They are rated for a maximum pressure of 5,000 psi, providing headroom for high-pressure grease guns. The steel construction handles demanding industrial lubrication tasks. The fittings meet or exceed SAE J-534-C standards for dimensional and performance requirements.
Thread Specification Decides Fit
The critical specification is the 1/4 In.-28 SAE-LT thread size, which determines compatibility with existing ports. Buyers must verify their equipment uses this exact thread pitch and diameter before purchasing. The straight head angle suits accessible lubrication points but will not work where an angled fitting is required. California Proposition 65 warnings apply regarding chemical content.
Highlights
- Straight head angle simplifies access in tight spots
- Zinc-plated steel resists corrosion for longer service life
- SAE J-534-C compliance confirms reliable pressure performance
- 5000 psi rating handles demanding lubrication tasks
- Pack of 10 fittings keeps maintenance stocked
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
Will these 1/4 In. -28 SAE-LT straight steel fittings thread into the existing ports on my older equipment?
The fittings use a 1/4 In. -28 SAE-LT thread, a common size on many machines; verify the port thread on your equipment matches before installing.
How can I confirm the 5,000 psi rated fittings are seated correctly after installation?
Wipe the zinc-plated head clean, apply grease gun pressure and watch for a steady flow from the bearing with no leakage around the threads.
Does the pack of 10 include any installation tools or thread sealant?
The package contains only the ten straight steel grease fittings; a grease gun, wrench and any sealant must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
