We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten zinc-plated steel 90-degree grease fittings

Westward

Westward 52NZ23 90° Steel Zinc Plated Fitting PK10

SKU CH-MGTS-R9YSK

Pack of ten zinc-plated steel 90° SAE-LT grease fittings rated to 6,000 psi

  • 90° angle routes grease around tight corners
  • Steel body with zinc plating resists corrosion
  • SAE-LT 1/4 in.-28 threads fit standard ports
  • Rated to 6,000 psi for high-pressure service
  • Pack of 10 covers multiple lubrication points

90° Steel Grease Fittings

The Westward 52NZ23 pack contains ten zinc-plated steel fittings with a 90-degree angle for lubrication points that are difficult to reach with straight versions. They suit automotive and industrial maintenance where standard SAE-LT threads are required.

Zinc-plated steel construction

Each fitting uses steel with a zinc-plated finish to resist corrosion in workshop environments. The 1/4 In. -28 SAE-LT thread matches common grease gun couplers, and the 35/64 in overall length fits standard access holes without protrusion.

Rated for 6,000 psi service

The fittings meet SAE J-534-C and withstand a maximum pressure of 6,000 psi, making them suitable for high-pressure grease systems. They are not intended for hydraulic lines or fluid transfer applications that require different thread forms or pressure ratings.

Highlights

  • 90° angle routes grease around tight corners
  • Steel body with zinc plating resists corrosion
  • SAE-LT 1/4 in.-28 threads fit standard ports
  • Rated to 6,000 psi for high-pressure service
  • Pack of 10 covers multiple lubrication points

Specifications

BrandWESTWARD

Questions about this item

What does the SAE-LT 1/4 in.-28 thread standard limit in practice?

The SAE-LT 1/4 in.-28 threads accept only mating ports cut to that exact pitch, so the fitting cannot be used on metric or NPT ports without an adapter.

What clearance does the 35/64 in. overall length and 90° angle require?

The 35/64 in. length plus the 90° bend needs at least that much straight reach plus room for the hex body to swing clear of adjacent surfaces.

How are these zinc-plated steel fittings installed, and what step is often missed?

Thread each fitting into a clean 1/4 in.-28 SAE-LT port to 6,000 psi rating, then torque to spec; the missed step is confirming the port threads are undamaged before installation.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.