Westward
Westward 48LY87 Flux-Cored Welding Wire 33 lb 0.045 in
Self-shielded flux-cored wire for carbon steel, 33 lb spool at 0.045 in diameter, E71T-GS classification, 70 ksi tensile strength
- TypeWelding Supplies
- 33 lb spool provides extended welding sessions
- 045 in diameter suits medium-thickness carbon steel
- E71T-GS classification ensures self-shielded flux-cored performance
- 70 ksi tensile strength delivers strong weld joints
- DCEN polarity optimised for consistent penetration
Westward 48LY87 Flux-Cored Wire
The Westward 48LY87 is a 33 lb spool of self-shielded flux-cored welding wire designed for carbon steel fabrication. Its 0.045 in diameter suits general-purpose structural and repair work using the FCAW process. The E71T-GS classification confirms suitability for single-pass and limited multi-pass applications on mild steel. Welders running DCEN polarity will find this wire matches their machine setup.
Thermals noise and power draw
As a consumable welding wire, this product generates no operational noise, thermal output or electrical power draw of its own. Heat and fume production depend entirely on the welding machine parameters and base material thickness used during the join. The self-shielded formulation eliminates the need for external gas cylinders, reducing ancillary equipment heat and noise in the workspace. Proper ventilation remains the responsibility of the operator.
Build fit and requirements
The plastic spool feeds directly into standard wire feeders compatible with 0.045 in flux-cored wire. No shielding gas regulator, hose or cylinder is required, freeing bench space and reducing setup time for field repairs. The wire is restricted to carbon steel-to-carbon steel joints and DCEN polarity only. Buyers needing stainless steel, aluminium or gas-shielded capabilities must select a different wire type.
Highlights
- 33 lb spool provides extended welding sessions
- 045 in diameter suits medium-thickness carbon steel
- E71T-GS classification ensures self-shielded flux-cored performance
- 70 ksi tensile strength delivers strong weld joints
- DCEN polarity optimised for consistent penetration
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
How do I install the 33 lb plastic spool of 0.045 in E71T-GS flux-cored wire on my feeder, and what step is often missed?
Mount the spool on the hub, thread the wire through the drive rolls and liner sized for 0.045 in, then set the drive-roll tension just tight enough to prevent slipping — over-tightening flattens the flux core and causes porosity.
What maintenance or replacement will this E71T-GS wire need after the 33 lb spool is used?
Replace the spool when empty; periodically clean or replace the contact tip and liner because self-shielded flux-cored wire deposits more spatter and liner debris than solid wire.
What limit appears first when running this 70 ksi tensile-strength wire continuously at high amperage?
The contact tip overheats and erodes faster with sustained DCEN current on 0.045 in self-shielded wire, so tip life becomes the practical limit before the wire itself is consumed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
