Westward
Westward 45J214 hand ratchet 3/4 inch drive 20 inch length
A 3/4 inch drive hand ratchet with a 15 degree minimum arc swing and 19 3/4 inch overall length, built from chrome vanadium steel
- TypeHand Ratchets
- 3/4 inch drive handles heavy sockets
- 19 3/4 inch length gives extra leverage
- 15 degree arc swing works in tight spaces
- Chrome vanadium steel resists wear
- Reversible pear head changes direction fast
3/4 inch drive hand ratchet
This 3/4 inch drive hand ratchet is built for heavy-duty fastening where high torque is required. The 20 inch length provides the leverage needed for large bolts and stubborn fixings in automotive and industrial settings. It suits mechanics and maintenance technicians who need a robust, non-powered turning tool. The pear-head design allows access in standard clearance situations.
15 degree minimum arc swing
Under sustained load the ratchet mechanism engages with a minimum arc swing of 15 degrees, letting you advance the fastener in tight arcs without removing the tool. The chrome vanadium steel body resists deformation when high force is applied repeatedly. No quick-release feature means the socket stays secured during heavy pulling. The reversing lever switches direction cleanly for continuous tightening or loosening cycles.
Check drive size and swing clearance
Verify that your sockets and accessories match the 3/4 inch square drive before ordering. Ensure the work area allows at least the 15 degree swing arc for the ratchet to function. The overall length of 19 3/4 inches demands sufficient lateral space around the fastener. Note the Proposition 65 warning regarding chemicals known to the State of California to cause cancer and reproductive harm.
Highlights
- 3/4 inch drive handles heavy sockets
- 19 3/4 inch length gives extra leverage
- 15 degree arc swing works in tight spaces
- Chrome vanadium steel resists wear
- Reversible pear head changes direction fast
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Hand Ratchets |
Questions about this item
How much arc swing does the 3/4 inch drive ratchet need to engage a fastener?
The ratchet requires a minimum arc swing of 15 degrees to engage, allowing use in tighter spaces where a larger swing is not possible.
What drive size sockets are required to use this 20 inch ratchet?
You must already own 3/4 inch drive sockets, as the ratchet has a fixed 3/4 inch square drive and cannot accept smaller or larger drives without an adapter.
Will the 19 3/4 inch overall length work alongside my existing 1/2 inch drive breaker bar?
This ratchet uses a 3/4 inch drive, so it takes different sockets than a 1/2 inch breaker bar; you cannot share sockets directly between them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
