Westward
Westward 2LXR3 Pipe Tap 1/8"-27 NPT 4 Flutes
Cuts 1/8"-27 NPT threads in pipe and conduit using four-flute carbon-steel construction for clean, accurate results
- TypeHole, Drill, Bore & Wire Gauges
- Cuts precise NPT threads with 4-flute carbon steel construction
- Taper design starts threads easily in 1/8"-27 pipe fittings
- 75% thread engagement using drill size Q for secure joints
- Bright uncoated finish resists corrosion during storage and use
- Right-hand threading matches standard pipe and conduit applications
Westward 1/8"-27 NPT Pipe Tap
This Westward pipe tap cuts internal NPT threads in pipe and conduit. The carbon steel construction provides strength for threading ferrous and non-ferrous materials. It features a taper design with four flutes for efficient chip evacuation. The tool is supplied in new condition.
Requires matching drill size for 75 percent thread
The tap creates threads with a 3/4 inch thread length and an overall length of 2 1/8 inches. A drill size Q is needed to prepare the hole before tapping. The right-hand cutting direction suits standard pipe threading operations. The bright uncoated finish is ready for use with cutting fluid.
Suits plumbers and maintenance technicians cutting
This tap is not intended for metric or straight thread applications. Users requiring different thread sizes, flute counts, or coated finishes should select an alternative tool. The specific 1/8"-27 NPT specification limits use to that standard only.
Highlights
- Cuts precise NPT threads with 4-flute carbon steel construction
- Taper design starts threads easily in 1/8"-27 pipe fittings
- 75% thread engagement using drill size Q for secure joints
- Bright uncoated finish resists corrosion during storage and use
- Right-hand threading matches standard pipe and conduit applications
Specifications
| Brand | Westward |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
How deep can the 1/8"-27 NPT threads be cut in a single pass?
The thread length is 3/4 in, so threads up to that depth can be cut in one pass with the 4-flute carbon-steel tap.
Does the carbon-steel tap generate excessive heat during all-day threading?
Carbon steel conducts heat well; using cutting fluid keeps the 1/8"-27 NPT tap cool enough for continuous daily use.
What drill size must I already have to prepare the hole for this tap?
A 75 percent thread drill size Q is required before starting the 1/8"-27 NPT threading operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
