Westward
Westward 2FGN9 L-Clamp Economy 12 in 4 3/4 in D
Economy L-clamp with 12 in capacity, 4 3/4 in throat depth and 2,600 lb clamping force
- TypeClamps
- 12-inch clamping capacity handles wide workpieces
- 2,600 lb clamping force secures heavy assemblies
- 4 3/4-inch throat depth reaches past edges
- Carbon steel bar resists bending under load
- Swivel jaw pads adapt to uneven surfaces
12-Inch L-Clamp with 4 3/4-Inch Throat Depth
This Westward economy bar clamp provides a 12-inch clamping capacity and a 4 3/4-inch throat depth for reaching across wider workpieces. The carbon steel bar measures 1 3/16 inches thick and uses a sliding bar mechanism with a swivel jaw pad to distribute pressure evenly. A steel sliding T-handle drives the 7/8-inch spindle to apply up to 2,600 pounds of clamping force. It is a straightforward tool for glue-ups, assembly and general shop holding tasks.
Upgrading from Smaller C-Clamps or Spring Clamps
When a project exceeds the reach or pressure of a standard C-clamp, this bar clamp adds both throat depth and total clamping force in one step. The sliding bar lets you set the jaw spread quickly without spinning a long screw, and the swivel pad prevents marring on angled surfaces. The jump is worth it whenever you need consistent, high pressure across a 12-inch span rather than spot pressure at the edge of a workpiece.
Suited for Woodworkers
Builders who regularly join panels, cabinets or frames will appreciate the 4 3/4-inch throat depth and high force rating. Users who only need light pressure on small parts or who require a clamp that fits in very tight corners should look at something else, as the bar thickness and T-handle demand more clearance than compact alternatives.
Highlights
- 12-inch clamping capacity handles wide workpieces
- 2,600 lb clamping force secures heavy assemblies
- 4 3/4-inch throat depth reaches past edges
- Carbon steel bar resists bending under load
- Swivel jaw pads adapt to uneven surfaces
Specifications
| Brand | Westward |
|---|---|
| Model | 2FGN9 |
| Type | Clamps |
Questions about this item
What is the clamping capacity and throat depth of the Westward 2FGN9 L-Clamp?
The clamp has a 12 in clamping capacity and a 4 3/4 in throat depth, allowing it to hold workpieces up to 12 inches wide with a reach of 4 3/4 inches from the bar.
How is the sliding T-handle mechanism operated, and what is the common mistake to avoid?
Slide the jaw along the 1 3/16 in thick carbon steel bar to the workpiece, then tighten the 7/8 in diameter spindle using the T-handle; the common error is applying excessive torque that can bend the bar or strip threads.
What maintenance does the swivel jaw pad and spindle require over time?
Keep the swivel jaw pad clean of debris so it rotates freely, and lubricate the 7/8 in spindle threads periodically to prevent seizing and maintain the 2,600 lb clamping force.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
