Westward
Westward 2CYT6 Tap Wrench 4 1/2 in Ratcheting Sliding
A ratcheting sliding T-handle tap wrench that accepts fractional taps from 7/32 in to 1/2 in and metric taps from M5.5 to M12
- TypeBent Nose Pliers
- Ratcheting sliding handle speeds repetitive tapping
- T-handle design gives firm grip and leverage
- Handles fractional taps from 7/32 in to 1/2 in
- Covers metric sizes M5.5 to M12
- Compact 4 1/2 in length fits tight spots
What this tap wrench does
The Westward 2CYT6 is a ratcheting sliding tap wrench designed for threading operations. It accepts fractional taps from 7/32 in to 1/2 in, machine screw taps at 1/4 in and metric taps from M 5.5 to M12. The T‑shaped handle gives leverage for controlled cutting in maintenance or light production work.
Installing and common issues
The sliding handle locks onto the tap square so the ratchet can advance without repositioning. If the tap square is worn or the wrong size, the jaws can slip and damage the tap. Clean chips from the jaws regularly and verify the tap size matches the stated capacity before starting a cut.
Behaviour under sustained load
The ratchet mechanism maintains direction during repeated forward strokes, reducing operator fatigue on longer threads. Steel construction resists flex when torque builds up in tougher materials. The 4 1/2 in overall length limits leverage on larger diameters, so very high‑torque jobs may need a longer wrench.
Highlights
- Ratcheting sliding handle speeds repetitive tapping
- T-handle design gives firm grip and leverage
- Handles fractional taps from 7/32 in to 1/2 in
- Covers metric sizes M5.5 to M12
- Compact 4 1/2 in length fits tight spots
Specifications
| Brand | Westward |
|---|---|
| Model | 2CYT6 |
| Type | Bent Nose Pliers |
Questions about this item
How can I verify the wrench is operating correctly after setup?
The ratchet should engage cleanly in both directions and the sliding T-handle must lock firmly at any position along its 4 1/2 in length without play.
What comes in the box and what must I supply separately?
The package contains the ratcheting sliding tap wrench only; taps, dies and any lubrication are not included and must be purchased separately.
Which capacity version covers both 1/4 in machine screws and M5.5–M12 metric taps?
This single model handles fractional taps from 7/32 in to 1/2 in, 1/4 in machine screws and metric sizes M5.5 to M12, so no additional version is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
