We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of red and black heavy-duty charging clips, steel jaws with vinyl insulation

Westward

Westward 23PC43 Solar Charging Clip 80 A Red/Black

SKU CH-SXJR-W5BCS

Heavy-duty battery charging clamps rated for 80 A at 12 V or 24 V with steel jaws and vinyl-insulated handles

  • TypeAccessories & Compressors
  • Heavy-duty 80 A charging clips handle high current safely
  • Red and black vinyl insulation identifies polarity at a glance
  • Steel jaws accept up to 1 3/4 in opening for secure battery connection
  • Compatible with 12 V and 24 V systems for versatile use
  • Accepts 14 to 18 AWG wire for flexible wiring options

Heavy-duty solar charging clips

These Westward 23PC43 clips connect solar panels or chargers to 12 V or 24 V battery banks. Each clip handles up to 80 A through steel jaws that open to 1 3/4 in. The pair comes in red and black vinyl insulation for clear polarity identification.

Build integration and wiring freedom

The clamps accept 14 to 18 AWG cable and lock onto posts or bus bars without permanent terminals. Their compact 2 15/16 in length and 1/2 in width fit tight battery compartments. No soldering or crimping tools are required for temporary or seasonal connections.

Upgrade from lighter clamps

The 80 A rating replaces lower-amperage clips that overheat on larger solar arrays. The jump is worth it when charging currents exceed what standard vinyl-insulated clamps can sustain. Buyers needing permanent ring-terminal connections or higher voltage ratings will need different hardware.

Highlights

  • Heavy-duty 80 A charging clips handle high current safely
  • Red and black vinyl insulation identifies polarity at a glance
  • Steel jaws accept up to 1 3/4 in opening for secure battery connection
  • Compatible with 12 V and 24 V systems for versatile use
  • Accepts 14 to 18 AWG wire for flexible wiring options

Specifications

BrandWESTWARD
TypeAccessories & Compressors

Questions about this item

How many amps can the 80 A clips carry continuously before the steel jaws overheat?

The clips are rated for a maximum of 80 A at 12 V or 24 V; sustained loads at that level will warm the steel contacts and vinyl insulation, so monitor temperature during long charging sessions.

Do the vinyl-insulated handles stay cool enough to touch after hours of 80 A charging?

Vinyl insulation resists heat, but at the full 80 A rating the steel jaws and clamp body will become hot; allow cooling periods and avoid continuous maximum-current use.

What wire gauges fit the 14 to 18 AWG terminals on these clamps?

The clamps accept 14 to 18 AWG conductors; strip the wire, insert into the clamp barrel, and crimp or solder for a secure connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.