Westward
Westward 22XP44 Drain Cleaning Cable 5/16 in 50 ft
A 50 ft hollow-core steel cable with bulb auger clears 1¼–2 in kitchen, laundry, lavatory and shop sink lines using compatible 22XP36 drain guns
- Clears 1 1/4 to 2 in lines with 50 ft reach
- 5/16 in steel cable fits tight bends in kitchen drains
- Hollow core reduces weight for easier drum feeding
- Bulb auger end grabs hair and debris in lavatory sinks
- Compatible with 22XP36 series drain guns for direct use
Drain Cleaning Cable 5/16 in 50 ft
The Westward 22XP44 is a 50-foot steel drum cable with a 5/16 inch diameter and hollow core. It terminates in a bulb auger designed to clear blockages in kitchen, laundry, lavatory and shop sink lines. The cable is compatible with drain guns and the 22XP36 cleaner series. It suits drain lines with an inside diameter between 1 1/4 inches and 2 inches.
Thermals noise and power draw
This manual cable has no motor, fan or electrical components, so it produces no operational noise and draws no power. Heat generation is limited to friction during use and is negligible for typical clearing tasks. No thermal management or power supply is required.
Build fit and requirements
The cable fits directly into compatible drain guns and the 22XP36 series without adapters. Its hollow core reduces weight for easier handling during long runs. The 50-foot length reaches deep clogs in residential and light commercial lines. Buyers needing larger diameters or different end attachments must select alternative cables.
Highlights
- Clears 1 1/4 to 2 in lines with 50 ft reach
- 5/16 in steel cable fits tight bends in kitchen drains
- Hollow core reduces weight for easier drum feeding
- Bulb auger end grabs hair and debris in lavatory sinks
- Compatible with 22XP36 series drain guns for direct use
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
How do I attach the 5/16 in cable to a compatible drain gun without damaging the bulb auger?
Feed the hollow-core cable into the drum of the 22XP36 series drain gun, then lock the bulb auger end securely; avoid over-tightening the set screw which can flatten the 5/16 in steel core.
When should the 50 ft steel cable be replaced instead of just cleaned?
Replace the cable if the hollow core shows kinks, permanent bends, or the bulb auger tip is worn past the original profile, as these reduce clearing power in 1 1/4 in to 2 in lines.
What is the longest drain run the 50 ft cable can clear before hitting its length limit?
The cable reaches 50 ft, so any blockage beyond that distance in kitchen, laundry, lavatory or shop-sink lines cannot be accessed without an extension or a longer cable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



