Westward
Westward 22XP04 Drawer Liner Black PVC 16-1/2 x 157 in
Protects tool cabinet drawers with open-weave PVC liner measuring 16-1/2 by 157 inches
- Protects drawers with open-weave PVC liner
- Covers large cabinets using 157 in roll length
- Fits standard tool chests at 16-1/2 in depth
- Resists wear with 1/16 in thick construction
- Single-piece design simplifies installation in garage storage
Westward PVC Drawer Liner
This Westward drawer liner is a single-piece PVC sheet with an open-weave pattern, designed to protect tool cabinet drawers from scratches and oil residue. Its 16-1/2 inch depth and 157 inch length cover large professional cabinets, and the black colour hides grime in busy workshops.
Check Cabinet Dimensions Before Ordering
Verify that each drawer interior measures at least 16-1/2 inches deep so the liner sits flat without bunching. Confirm the total drawer length you need to cover does not exceed 157 inches, otherwise you will require an additional roll. Ensure the cabinet surface is clean and dry before laying the liner down.
Open Weave Handles Sustained Workshop Use
The open-weave PVC construction lets debris fall through rather than trapping moisture against tools during long shifts. At 1/16 inch thick the material resists tearing when heavy sockets or wrenches are slid across it repeatedly. The liner stays flexible in cold garage temperatures and does not curl at the edges after weeks of daily drawer cycling.
Highlights
- Protects drawers with open-weave PVC liner
- Covers large cabinets using 157 in roll length
- Fits standard tool chests at 16-1/2 in depth
- Resists wear with 1/16 in thick construction
- Single-piece design simplifies installation in garage storage
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
Does the Westward 22XP04 drawer liner come with adhesive or fasteners, or do I need to buy them separately?
The liner is supplied as a single piece of open-weave PVC measuring 16-1/2 by 157 inches and 1/16 inch thick; no adhesive or fasteners are included, so you will need to source a compatible non-slip tape or mat grip if you want it fixed in place.
The roll is 157 inches long — how do I decide how much to cut for each drawer?
Measure the interior depth and width of each drawer, then cut the 16-1/2-inch-wide material to the exact depth required; the 157-inch length provides enough stock for several standard tool-cabinet drawers.
Will the 1/16-inch-thick PVC liner stay flat and protect the drawer bottom under heavy sockets?
At 1/16 inch thick the open-weave PVC cushions impacts and resists tearing, keeping tools from sliding while conforming to the drawer floor under normal workshop loads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
