Westward
Westward 20YE05 36'' TIG Welding Rod 3/32" AWS ER1100 1 lb
Aluminium TIG welding rod, AWS ER1100, 3/32 in. diameter, 36 in. length, 1 lb pack for joining common aluminium grades
- TypeWelding Supplies
- Aluminium-to-aluminium joins with ER1100 alloy
- 36 in rods suit standard TIG torch access
- 3/32 in diameter feeds smoothly in GTAW
- 13 ksi tensile strength for reliable welds
- 1 lb pack covers small fabrication jobs
36 in ER1100 TIG Rod 3/32 in
Westward 20YE05 is a 36 inch TIG welding rod with a 0.0938 inch diameter. It carries AWS ER1100 classification and weighs 1 lb. The filler metal is designed for aluminium-to-aluminium joining using the GTAW process. As-welded tensile strength is 13 ksi.
Suitable Grades and Unsuitable Materials
This rod suits base metals graded 1050, 1060, 1070, 1100, 1145, 1199, 1200, 1230, 1350, 1370, 1420, 1421, 1424, 1430, 1440, 1441, 1441K, 1445, 1450 and 1460. It does not suit steels, stainless steels, copper alloys or other non-aluminium substrates. Buyers needing filler for dissimilar metal joints or higher-strength aluminium alloys should look elsewhere.
AWS ER1100 Classification Decides Fit
The single specification that decides fit is the AWS ER1100 classification, which defines the chemical composition and mechanical properties for commercially pure aluminium filler. Match this classification to the welding procedure specification and base-metal grade before purchase.
Highlights
- Aluminium-to-aluminium joins with ER1100 alloy
- 36 in rods suit standard TIG torch access
- 3/32 in diameter feeds smoothly in GTAW
- 13 ksi tensile strength for reliable welds
- 1 lb pack covers small fabrication jobs
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
What diameter TIG torch collet and cup do I need for the 3/32" (.0938 in) ER1100 rod?
Use a 3/32 inch (0.0938 in) collet body and matching gas lens or standard cup; the rod diameter matches the collet size exactly.
How do I prep the 1 lb pack of 36 in ER1100 rods before the first TIG weld on 1100-grade aluminium?
Wipe each rod with acetone or dedicated aluminium cleaner, remove any oxide with a stainless brush used only for aluminium, then feed clean rod into the puddle.
When should I replace a partially used 1 lb tube of ER1100 rods?
Replace rods if the surface shows white oxidation, contamination from other metals, or if the diameter has worn below 3/32 in from handling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
