Westward
Westward 20YE03 36'' TIG Welding Rod 1/16" AWS ER1100 1 lb
TIG welding rod for aluminium alloys, 36 in length, 1/16 in diameter, ER1100 classification, 13 ksi tensile strength, 1 lb pack
- TypeTraffic & Parking Lot
- TIG rod for aluminium with ER1100 classification
- 36 inch length suits standard torch access
- 1/16 inch diameter feeds smoothly in GTAW
- 13 ksi tensile strength for reliable joints
- One pound pack covers multiple small repairs
AWS ER1100 TIG Rod for Aluminium
This 1 lb pack contains 36 in TIG welding rods classified to AWS ER1100 for joining aluminium to aluminium. The rods are made from low-alloy steel and measure 0.0625 in diameter by 36 in length. As-welded tensile strength is rated at 13 ksi.
For aluminium grades 1050 through 1460
The specification lists compatibility with grades 1050, 1060, 1070, 1100, 1145, 1199, 1200, 1230, 1350, 1370, 1420, 1421, 1424, 1430, 1440, 1441, 1441K, 1445, 1450 and 1460. Buyers needing filler metal for other aluminium alloys or for non-aluminium base metals should look at something else.
Diameter 0.0625 in (1/16 in)
The single dimension that decides fit is the 0.0625 in rod diameter. Select this pack only if your TIG set-up and joint design call for a 1/16 in filler rod; a different diameter will not feed correctly through the same torch components.
Highlights
- TIG rod for aluminium with ER1100 classification
- 36 inch length suits standard torch access
- 1/16 inch diameter feeds smoothly in GTAW
- 13 ksi tensile strength for reliable joints
- One pound pack covers multiple small repairs
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
How strong is the 13 ksi tensile strength when the rod is welded into a joint?
The as-welded tensile strength is 13 ksi, which is the measured pull resistance of the finished aluminum weld.
What does the AWS ER1100 classification tell me about the rod's composition and use?
ER1100 identifies a commercially pure aluminum filler for TIG welding 1050, 1060, 1070, 1100, 1145, 1199, 1200, 1230, 1350, 1370, 1420, 1421, 1424, 1430, 1440, 1441, 1441K, 1445, 1450 and 1460 alloys.
Will the 36 in length and .0625 in diameter fit my TIG torch and feeder?
Each rod is 36 in long and .0625 in (1/16 in) diameter, the standard size for most TIG torches and hand feeding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
