We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of 14 inch carbon steel welding electrodes 5/32 inch diameter 5 lb

Westward

Westward 20YD22 14 in Welding Electrode 5/32 in AWS E6013 5 lb

SKU CH-7RKJ-A57RF

14-inch carbon-steel stick electrodes, 5/32 in diameter, AWS E6013 classification for AC/DC welding in all positions

  • TypeWelding Supplies
  • AWS E6013 classification suits general carbon-steel fabrication
  • 14 in length and 5/32 in diameter fit standard SMAW holders
  • 60 ksi tensile strength meets structural requirements
  • AC, DCEN and DCEP current compatibility adds machine flexibility
  • 5 lb package supports extended welding sessions

Westward 20YD22 Stick Electrode

Westward 20YD22 is a 14 in stick electrode with a 5/32 in diameter. It carries AWS E6013 classification and is made from carbon steel. The pack weighs 5 lb and is supplied new for general fabrication work.

Suited for flat, horizontal.

The electrode operates on AC, DCEN and DCEP current. Minimum tensile strength is 60 ksi and minimum yield strength is 48 ksi. Welders who need a different AWS classification or a non‑carbon‑steel consumable should select another product.

AWS E6013 classification confirms carbon‑steel

This designation means the rod meets the 60 ksi tensile and 48 ksi yield requirements for carbon‑steel‑to‑carbon‑steel joints. The classification is the single figure that decides whether the electrode matches the job specification.

Highlights

  • AWS E6013 classification suits general carbon-steel fabrication
  • 14 in length and 5/32 in diameter fit standard SMAW holders
  • 60 ksi tensile strength meets structural requirements
  • AC, DCEN and DCEP current compatibility adds machine flexibility
  • 5 lb package supports extended welding sessions

Specifications

BrandWESTWARD
TypeWelding Supplies

Questions about this item

How do I install the 14 in E6013 electrode and what step is often missed?

Clamp the 5/32 in rod in the holder, set the machine to AC, DCEN or DCEP, and clean the carbon steel joint thoroughly — skipping the cleaning step causes porosity.

What maintenance or replacement will the 5 lb pack of E6013 electrodes need later?

Store the remaining rods in a sealed container to prevent moisture pickup; once a rod is used it is consumed and must be replaced with a new E6013 electrode.

What limit appears first when running the E6013 electrode continuously on carbon steel?

The 60 ksi tensile strength and 48 ksi yield strength define the weld metal capacity; exceeding these stresses under sustained load will cause the joint to fail first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.