Westward
Westward 20AN39 Mig Welding Wire 0.023in 10 lb ER308LSi Stainless Steel
Stainless-steel MIG wire, 0.023 in diameter on a 10 lb spool, ER308LSi grade for 304L and 308L base metals
- TypeTraffic & Parking Lot
- ER308LSi classification matches 304L and 308L stainless grades
- 023 in wire diameter enables precise MIG welds on thin material
- 85 ksi tensile strength delivers strong as-welded joints
- 55 ksi minimum yield meets AWS A5.9 requirements
- 10 lb plastic spool feeds smoothly in GMAW applications
ER308LSi grade for 304L and 308L stainless
This Westward MIG wire is classified AWS A5.9 ER308LSi and comes on a ten pound plastic spool. The .023 inch diameter suits thin sheet work on grades 304L, 304LN and 308L. The wire carries the required Proposition 65 warnings for California.
DCEP polarity on thin stainless sheet
The wire is designated for DCEP current when joining stainless to stainless in the listed grades. Shops running AC or DCEN polarity, or welding carbon steel, aluminium or duplex grades, should select a different consumable.
.023 inch diameter on a ten pound spool
The spool holds ten pounds of .023 inch ER308LSi wire rated at 85 ksi tensile and 55 ksi yield strength as welded. This diameter and package weight determine feed rate and changeover frequency for the job.
Highlights
- ER308LSi classification matches 304L and 308L stainless grades
- 023 in wire diameter enables precise MIG welds on thin material
- 85 ksi tensile strength delivers strong as-welded joints
- 55 ksi minimum yield meets AWS A5.9 requirements
- 10 lb plastic spool feeds smoothly in GMAW applications
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Traffic & Parking Lot |
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
