We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red EPDM welding cable on a spool, 6 AWG copper conductor, 100 ft length

Westward

Westward 19YE23 Welding Cable 6 AWG EPDM Red 100ft 600V

SKU CH-TDFQ-5MBM1

Six-AWG copper welding cable with EPDM insulation rated to 600 V and 150 °F, supplied in a 100 ft red reel

  • TypeWire & Cable
  • 6 AWG copper conductor handles heavy welding current
  • EPDM insulation resists heat up to 150°F
  • 600 V rating meets industrial power requirements
  • 100 ft continuous length reduces splice points
  • Red jacket provides clear phase identification

Industrial Welding Cable 6 AWG 100ft

This 100 ft length of 6 AWG welding cable is built for industrial and automotive electrical work. It uses copper conductors wrapped in EPDM insulation rated for 600 V service. The red jacket provides clear visibility in workshop environments. It suits fabricators, maintenance teams and automotive technicians who need flexible power leads.

Upgrade From Thinner Gauge Leads

Moving from a smaller gauge to 6 AWG reduces voltage drop on long runs and handles higher amperage without overheating. The 150 °F temperature rating supports sustained loads in demanding conditions. The jump is worth it when existing cables run warm or when equipment demands exceed the capacity of lighter wire.

Build Integration And Routing

The EPDM jacket resists oil, abrasion and weather, allowing direct routing through harsh shop areas. Its flexibility eases installation around tight bends and moving machinery. The 100 ft reel lets you cut custom lengths for multiple stations, freeing you from fixed short leads and reducing splice points in the circuit.

Highlights

  • 6 AWG copper conductor handles heavy welding current
  • EPDM insulation resists heat up to 150°F
  • 600 V rating meets industrial power requirements
  • 100 ft continuous length reduces splice points
  • Red jacket provides clear phase identification

Specifications

BrandWESTWARD
TypeWire & Cable

Questions about this item

What conduit or tray size accommodates a 6 AWG EPDM welding cable?

A 6 AWG cable typically requires conduit sized for its outer diameter; consult local electrical code fill tables for the correct trade size.

How do you terminate the copper conductor on this 19YE23 cable, and what step is often missed?

Strip the EPDM jacket cleanly, apply a properly sized copper lug, crimp with the correct die, then heat-shrink — the step often missed is verifying crimp compression with a go/no-go gauge.

When should the 100 ft red 600 V welding cable be inspected or replaced?

Inspect the EPDM jacket every 6 months for cuts, abrasion, or heat damage above 150 °F; replace immediately if conductor exposure or insulation cracking is found.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.