We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Honeycomb grid and five coloured gels with twist-lock mount for FJ80 speedlight

Westcott

Westcott Grid & Gel Pack FJ80 Twist Lock

SKU CH-VZM9-MKHNX

A 30-degree honeycomb grid and five colour gels with a twist-lock mount for FJ80 speedlights

  • Focused 30-degree beam with minimal spill
  • Window Green, CTB, CTO gels correct colour temperature
  • Diffusion gel softens light for flattering portraits
  • Twist-lock ring secures pack to FJ80 speedlight
  • Works with FJ80, FJ100, FJ200 and L60-B

Precision Light Control for FJ80 Speedlights

The Westcott Grid & Gel Pack is a dedicated accessory kit built for the FJ80 speedlight. It provides a 30-degree honeycomb grid and five rigid gels so photographers can shape output, correct colour temperature and soften shadows without changing lights. The twist-lock ring secures every piece to the flash head for reliable mounting during active shoots.

Quick Twist-Lock Setup and Common Fit Issues

Installation takes seconds: align the mounting ring with the FJ80 head and twist until it locks. The rigid gels and grid slide into the ring channels and stay seated. Problems occur when the ring is not fully rotated into the detent — the assembly can loosen under modifier weight — or when users try to force the kit onto FJ100, FJ200 or L60-B heads, which have different mount profiles.

The 30-Degree Grid Defines the Beam

The single specification that decides suitability is the 30-degree honeycomb grid angle. It narrows the flash spread to a tight, controlled beam with hard edges and minimal spill, ideal for dramatic accent lighting or hair separation. If the project demands a wider wash, a softer fall-off or a different beam angle, this pack will not deliver the required coverage.

Highlights

  • Focused 30-degree beam with minimal spill
  • Window Green, CTB, CTO gels correct colour temperature
  • Diffusion gel softens light for flattering portraits
  • Twist-lock ring secures pack to FJ80 speedlight
  • Works with FJ80, FJ100, FJ200 and L60-B

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 30-degree honeycomb grid is focusing light correctly on my FJ80?

The grid produces a tight beam with sharp edges and minimal spill; aim at a wall and verify the illuminated circle matches the expected narrow spread.

What items come in the pack and which FJ80 accessories must I purchase separately?

The pack includes a 30-degree honeycomb grid, five rigid gels — Window Green, CTB, 1/2-CTO, 3/4-CTO, Diffusion — and a twist-lock mounting ring; the FJ80 speedlight itself is sold separately.

Which gel should I choose to match flash output to daylight or tungsten ambient light?

Use CTB to cool the flash toward daylight balance or 1/2-CTO and 3/4-CTO to warm it toward tungsten; Window Green corrects fluorescent sources.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.