WESIZAR SCC1 RJ45 Coupler Grey 90 degree 100m 1200Mbps Cat7 IP67
Grey 90-degree RJ45 coupler joins two cables for Starlink Gen 3 and Mini up to 100 metres at 1200 Mbps with IP67 protection
- TypeRJ45
- Changer TypeDB25 to RJ45
- ColorGrey 90 degree
- SpecificationsRJ45, 1.905 L x 7.0104 W x 11.2014 H centimeters, 2 Year Man
- Connector StyleRJ45
- FeaturesRJ45
- Plug-and-play Starlink Gen 3/Mini connection without cable cutting
- All-metal shielded Cat7 coupler delivers 1200 Mbps over 100 m
- IP67 waterproof design resists water, dust and debris outdoors
- Joins two RJ45 cables to extend network reach easily
- Compact 90-degree grey housing measures 1.905 × 7.0104 × 11.2014 cm
Starlink Gen 3 & Mini Coupler
The WESIZAR SCC1 is a plug-and-play RJ45 coupler built for Starlink Gen 3 and Mini terminals. It joins the proprietary Starlink cable to standard Ethernet wiring without cutting or soldering. Installers, RV owners and marine users can extend a satellite link to a router, switch or wired device in minutes. The IP67-rated housing survives rain, dust and temporary immersion.
Cat 7 Shielding & 100-Metre Reach
The all-metal shielded body meets the Cat 7 standard and supports runs up to 100 metres while maintaining 1200 Mbps throughput. Shielding blocks external electromagnetic interference that can degrade satellite signals. The 90-degree grey connector eases routing in tight cabinets, mast bases or vehicle bulkheads. No power supply or configuration is required.
Replaces Cable Cutting & Inline Splices
This coupler replaces the practice of cutting the Starlink cable and crimping field terminations, which risks water ingress and signal loss. It also removes the need for separate weatherproof enclosures at the joint. The jump is worth it when the factory cable is too short for the mounting location or when a permanent, sealed connection is preferred over temporary tape-and-heatshrink repairs.
Highlights
- Plug-and-play Starlink Gen 3/Mini connection without cable cutting
- All-metal shielded Cat7 coupler delivers 1200 Mbps over 100 m
- IP67 waterproof design resists water, dust and debris outdoors
- Joins two RJ45 cables to extend network reach easily
- Compact 90-degree grey housing measures 1.905 × 7.0104 × 11.2014 cm
Specifications
| Brand | WESIZAR |
|---|---|
| Series | SCC1 |
| Model | SCC1 |
| Type | RJ45 |
| Changer Type | DB25 to RJ45 |
| Color | Grey 90 degree |
| Specifications | RJ45, 1.905 L x 7.0104 W x 11.2014 H centimeters, 2 Year Manufacturer, SCC1, grey |
| Connector Style | RJ45 |
| Features | RJ45 |
| Dimensions | 20' |
| Package Quantity | 1 |
| Package Contents | 1 x RJ45 |
| Disclaimer | not_applicable, true |
Questions about this item
Which WESIZAR SCC1 variant should I choose for a right-angled Starlink Gen 3 connection?
The SCC1 in grey with a 90-degree connector style is the single version listed, designed for plug-and-play use with Starlink Gen 3 and Mini without cutting cables.
What does the 1200 Mbps figure mean when the coupler is installed between two cables?
The coupler supports Cat 7 with all-metal shielding, allowing up to 1200 Mbps transmission over 100 metres while blocking electromagnetic interference for stable satellite performance.
How does the IP67 rating limit where and how I can install this RJ45 coupler?
IP67 waterproofing protects against water, dust and debris ingress, so the coupler can be used outdoors on yachts, RVs or camping setups as well as indoors.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
