Wera Tools
Wera Tools Joker Metric Ratcheting Combination Wrench Set 10-19mm 4 Piece
Four-piece reversible ratcheting combination wrench set covering 10 mm to 19 mm in nickel chrome vanadium steel
- TypeMulti-Tools
- Four-piece set covers 10–19 mm common fasteners
- Nickel chrome vanadium steel resists wear under load
- Fully reversible ratchet speeds direction changes
- 12-point profile engages bolt heads from multiple angles
- Compact lengths from 159 mm to 246 mm fit tight spaces
Four-piece ratcheting combination wrench set
The Wera 05073290001 set contains four metric ratcheting combination wrenches covering 10 mm to 19 mm. Each wrench is forged from nickel chrome vanadium steel and features a 12-point reversible ratchet mechanism. The pieces range in length from 159 mm to 246 mm for reach in confined spaces. It is supplied new for professional and serious DIY use.
Technicians needing 10 mm to 19 mm fasteners
Mechanics and maintainers who regularly work on metric hardware in the 10 mm to 19 mm range gain a compact, ratcheting kit that reduces the need to swap tools. Users who require sizes outside this span, finer tooth counts, or a larger piece count should select a different set. The four-piece configuration suits targeted jobs rather than complete coverage.
12-point reversible ratchet on nickel chrome
The defining specification is the 12-point reversible ratchet head combined with nickel chrome vanadium steel construction. This geometry allows engagement on 12-point and 6-point fasteners while the ratchet direction is flipped without removing the wrench. Buyers verifying that the ratchet mechanism and material meet their durability requirements can confirm suitability from this detail.
Highlights
- Four-piece set covers 10–19 mm common fasteners
- Nickel chrome vanadium steel resists wear under load
- Fully reversible ratchet speeds direction changes
- 12-point profile engages bolt heads from multiple angles
- Compact lengths from 159 mm to 246 mm fit tight spaces
Specifications
| Brand | Wera |
|---|---|
| Type | Multi-Tools |
Questions about this item
What drive standard do the 12-point ratcheting heads follow, and what fastener sizes does that cover in this set?
The 12-point heads use a standard metric drive, covering nuts and bolts from 10mm through 19mm across the four wrenches.
What are the overall lengths of the four wrenches, and will the longest fit in a standard tool chest drawer?
Lengths range from 159mm for the 10mm wrench up to 246mm for the 19mm wrench, so the longest needs at least 246mm of clear drawer depth.
How is the ratchet direction reversed, and what is the common mistake?
Flip the wrench over to reverse the ratchet; the mistake is trying to turn a lever or switch that does not exist on this design.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
