We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black 10mm four-pin solderless LED strip connectors with a blue opening tool

WENHSIN 10-Pack 4-Pin 10mm RGB LED Strip Connectors

SKU CH-S17X-7MSR0

Ten solderless 4-pin connectors join 10 mm RGB strips up to 72 W without tools

  • ColorBlack
  • Solderless snap-on design speeds up LED strip installation
  • 10mm 4-pin compatibility fits SMD 5050 RGB strips directly
  • PBT fire-retardant housing protects strips from heat damage
  • 72 W maximum rating handles high-brightness lighting runs
  • Tool-free operation with included pick simplifies every connection

10-Pack 4-Pin 10mm RGB LED Strip Connectors

This 10-pack provides solderless connectors for 10mm wide, 4-pin RGB LED strips using SMD 5050 LEDs. Each connector handles up to 72W of lighting load. The set includes ten connectors and one blue opening pick for tool-free installation. Builders wiring RGB strip runs in automotive or decorative projects will find the quantity convenient.

Solderless Clip Installation

Installation requires no soldering iron; the supplied blue pick opens the side clip so the strip slides under the metal prongs. Users must align the "+" marks on both strip sections before snapping the clip shut. The connector is designed for silicone-coated waterproof strips, so the coating must be seated correctly to avoid a loose contact. Strips wider or narrower than 10mm, or with a different pin count, will not fit.

Sustained Load Behaviour

The PBT fireproof housing is rated for a working temperature range of 0 to 50°C and storage from -20 to 60°C. Under continuous 72W operation the material resists ignition and maintains structural integrity. The solderless joint remains stable as long as the clip stays fully closed and the strip alignment is preserved..connectors for 8mm or 12mm strips, or for two-pin single-colour tape, are not compatible with this product.

Highlights

  • Solderless snap-on design speeds up LED strip installation
  • 10mm 4-pin compatibility fits SMD 5050 RGB strips directly
  • PBT fire-retardant housing protects strips from heat damage
  • 72 W maximum rating handles high-brightness lighting runs
  • Tool-free operation with included pick simplifies every connection

Specifications

ColorBlack

Questions about this item

How do I verify the 4-pin RGB LED strips are correctly connected after snapping the 10mm connectors shut?

Ensure the plus marks on both strips align in the same direction under the metal prongs, close the clip firmly with the blue pick, then power on — all LEDs should light evenly across the join with no flicker or colour mismatch.

What comes in the 10-pack and what must I supply myself?

The box contains ten 4-pin 10 mm gapless connectors, one blue opening pick and an instruction sheet; you must provide the 10 mm SMD 5050 RGB or RGBW LED strips and a suitable power supply.

Which connector version should I choose for a 10 mm wide SMD 5050 RGB strip rated up to 72 W?

Select this 10-pack of 4-pin 10 mm solderless connectors — they are specified for 0.39 inch wide strips, support up to 72 W and operate from 0 °C to 50 °C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.