Wenglor
Wenglor S23-10M connecting line 10 m M12 4-pin IP67
A 10 m M12 4-pin connecting line with IP67 protection and PVC jacket rated from -5 to 70 °C
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 m cable reaches distant sensors
- M12 4-pin connector fits standard ports
- IP67 rating resists dust and water
- PVC jacket handles -5 to 70 °C
- Nickel-plated brass nut ensures secure fit
Industrial connecting line for sensor wiring
The Wenglor S23-10M is a 10 m connecting line with a straight M12 × 1, 4-pin socket on one end and stripped wires on the other. It suits technicians wiring sensors or actuators in industrial environments. Builders who need a pre-assembled plug on both ends cannot use this cable.
M12 × 1, 4-pin socket with IP67 protection
The single specification that decides fit is the M12 × 1, 4-pin connection mode combined with an IP67 degree of protection. The nickel-plated CuZn sleeve nut tightens to 0,6 Nm. Buyers whose equipment uses a different thread size or pin count must select another cable.
10 m PVC-jacketed cable rated -5...70 °C
The 10 m length and 0,34 mm² wire cross-section handle typical sensor runs inside the stated temperature range. The PVC jacket and insulation resist oil and moisture to IP67. Installations requiring longer reach, higher temperature tolerance or halogen-free materials will exceed this cable’s limits.
Highlights
- 10 m cable reaches distant sensors
- M12 4-pin connector fits standard ports
- IP67 rating resists dust and water
- PVC jacket handles -5 to 70 °C
- Nickel-plated brass nut ensures secure fit
Specifications
| Brand | Wenglor |
|---|---|
| Model | S23-10M |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What does the 10 m length mean for routing in a real machine?
The 10 m cable lets you run from a sensor to a cabinet across a medium-sized cell without splices, and the 5 mm outer diameter keeps the bend radius manageable in tight cable trays.
What does the M12 × 1, 4-pin interface cap in practice?
The M12 × 1, 4-pin socket carries standard 4-wire sensor signals and the 0,6 Nm torque spec ensures a reliable IP67 seal when tightened correctly.
What does the stripped end need to fit or mount?
The stripped end requires termination — crimp ferrules, screw terminals or a field-wireable connector — to match your I/O block or terminal strip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



