Weller
Weller WSP80N Soldering Iron 80W 24V
An 80 W, 24 V soldering iron for precision work, adjustable from 150 °F to 850 °F, ESD-safe, with Silver-Line heating and LT-series tip compatibility
- TypeSolders & Supplies
- 80 W power enables fast heat-up for demanding joints
- 150 °F to 850 °F range covers delicate to heavy-duty tasks
- 24 V low-voltage design protects sensitive components with ESD safety
- Silver-Line heating technology maintains stable tip temperature during use
- Compatible with WR2000VX, WT1, WT1H, WT1012 and WT1013 stations
Weller 80 W 24 V Soldering Iron
This 80 W soldering pencil runs on 24 V and connects to compatible Weller stations such as the WR2000VX, WT1, WT1H, WT1012 and WT1013. It is built for electronics assembly, repair and automotive wiring tasks that demand precise temperature control. The ESD-safe construction protects sensitive components during every joint. A single LT-series chisel tip and the heating element are included in the package.
Silver-Line Heating Technology under sustained load
Silver-Line Heating Technology delivers rapid heat-up and stable output during long soldering sessions. The iron reaches a maximum operating temperature of 850 °F and can be dialled down to 150 °F for delicate work. Power draw tops out at 80 W, so the station maintains consistent thermal performance without sag when joints are made back to back. The 4 ft cord gives freedom of movement around the bench.
Thermals, noise and power draw in normal use
The pencil runs silently because it has no integrated fan; all cooling is passive through the barrel. At 24 V and 80 W maximum draw the station stays cool to the touch during typical use. ESD-safe materials prevent static discharge without adding electrical noise to the circuit. The durable heating element and included tip reduce the need for frequent replacements.
Highlights
- 80 W power enables fast heat-up for demanding joints
- 150 °F to 850 °F range covers delicate to heavy-duty tasks
- 24 V low-voltage design protects sensitive components with ESD safety
- Silver-Line heating technology maintains stable tip temperature during use
- Compatible with WR2000VX, WT1, WT1H, WT1012 and WT1013 stations
Specifications
| Brand | Weller |
|---|---|
| Type | Solders & Supplies |
Questions about this item
How much heat does the 80 W WSP80N generate during long sessions?
The iron reaches a maximum tip temperature of 850 °F and a minimum of 150 °F while drawing 80 W at 24 V, with Silver-Line heating technology for fast recovery.
Which power station do I need to run this 24 V pencil?
It plugs into Weller stations WR2000VX, WT1, WT1H, WT1012 or WT1013 via the station connector on the 4 ft cord.
Can I keep using my existing LT-series tips with the WSP80N?
Yes — the iron accepts the LT compatible tip series, and one chisel tip is included in the box.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
