Weller
Weller WP 65 Soldering Iron Pencil 65 W 24 V 1.6 mm Tip
A 65 W, 24 V soldering pencil with a 1.6 mm chisel tip that reaches 850 °F in 7 seconds and works with WR and WT stations
- TypeWelding Supplies
- Fast heat-up in 7 seconds for efficient work
- Precise 1.6 mm chisel tip for detailed soldering
- Broad 200–850 °F range suits varied tasks
- 65 W at 24 V delivers strong, stable power
- Compatible with WR and WT series stations
Weller WP 65 Soldering Iron
The Weller WP 65 is a 65 W soldering iron pencil that operates at 24 V. It reaches a maximum temperature of 850 Degrees F in about 7 seconds and has a minimum operating temperature of 200 Degrees F. The included chisel tip measures 1.6 mm wide and the heating element is built into the pencil.
Installation and Common Issues
The pencil plugs directly into compatible Weller stations using the station connector. Compatible models include WR3M, WR3000M, WR3000TA, WT1, WT1H, WT1011, WT2M, WT2010M and WT2021MS. Problems usually arise when the pencil is connected to a station not on this list or when the tip is not seated firmly before heating.
Who This Suits and Who It Does Not
This iron suits technicians and hobbyists who already own a compatible Weller station and need a 65 W pencil with a fine chisel tip. It is not for buyers who need a complete station, a different tip geometry, a higher or lower power rating, or a pencil that works with stations outside the listed series.
Highlights
- Fast heat-up in 7 seconds for efficient work
- Precise 1.6 mm chisel tip for detailed soldering
- Broad 200–850 °F range suits varied tasks
- 65 W at 24 V delivers strong, stable power
- Compatible with WR and WT series stations
Specifications
| Brand | WELLER |
|---|---|
| Type | Welding Supplies |
Questions about this item
How can I confirm the WP 65 reaches its 850 °F maximum after setup?
The iron heats to its maximum temperature in 7 seconds; verify the station display reads 850 °F and test solder flow on a joint.
What comes with the WP 65 and what must I supply separately?
The package includes the pencil, a 1.6 mm chisel tip and the heating element; a compatible WR or WT series station is required but not included.
Which tip width suits fine-pitch work on this 65 W model?
The supplied 1.6 mm chisel tip is the only width included; other XNT-series tips must be purchased separately for different geometries.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
