We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular camera module with Type-C USB3.0 connector and flexible ribbon cable

Weinandianzi

Weinandianzi WN-L2603K444L V3.0-378 12MP USB3.0 Camera Module IMX378

SKU CH-GVHV-N62MA

12 MP USB 3.0 camera module with a 1/2.3-inch IMX378 sensor, 79.4° field of view, autofocus and MJPEG or YUY2 output up to 4048 × 3024 at 30 fps

  • TypeOther
  • Quantity1
  • Specifications12MP HD USB3.0 Camera Module
  • Compatibility1/2.3-Inch IMX378 CMOS
  • Features4048x3024 12MP HD USB3.0 Camera Module IMX378
  • 12 MP resolution captures fine detail with 4048×3024 sensor
  • USB 3.0 Type-C interface delivers 30 fps at full resolution
  • 1/2.3-inch IMX378 CMOS provides 1.55 µm pixels for low-light sensitivity
  • 4° diagonal field of view covers wide scenes without distortion
  • MJPEG and YUV2 output formats give flexible integration for face recognition

12MP USB3.0 Camera Module IMX378

This Weinandianzi WN-L2603K444L V3.0-378 camera module delivers a 12MP resolution of 4048x3024 pixels using a 1/2.3-inch IMX378 CMOS sensor. It connects via a TYPEC USB3.0 interface and supports UVC protocol for driver-free operation. The module is suited for face recognition and machine vision applications.

Sustained Load Behaviour

At the full 4048x3024 resolution the module maintains 30 frames per second in MJPG format while YUY2 output drops to 10 frames per second. Lower resolutions such as 1920x1080 sustain 30 frames per second in both formats. The fixed 79.4° DFOV and 1.55µm pixel size remain constant during extended capture sessions.

Integration Checklist

Verify that your host provides a TYPEC USB3.0 port capable of high-speed data transfer. Confirm your software can process MJPG or YUY2 streams at the listed frame rates for your target resolution. Ensure the 40x29x9.9mm motherboard and 170.5mm FPC cable fit within your mechanical enclosure.

Highlights

  • 12 MP resolution captures fine detail with 4048×3024 sensor
  • USB 3.0 Type-C interface delivers 30 fps at full resolution
  • 1/2.3-inch IMX378 CMOS provides 1.55 µm pixels for low-light sensitivity
  • 4° diagonal field of view covers wide scenes without distortion
  • MJPEG and YUV2 output formats give flexible integration for face recognition

Specifications

BrandWeinandianzi
ModelWN-L2603K444L V3.0-378
TypeOther
Quantity1
Specifications12MP HD USB3.0 Camera Module
Compatibility1/2.3-Inch IMX378 CMOS
Features4048x3024 12MP HD USB3.0 Camera Module IMX378

Questions about this item

Does the IMX378 sensor run hot when streaming 4048x3024 at 30 FPS all day?

The module draws power from the USB 3.0 bus and has no active cooling; sustained 30 FPS operation at full resolution will warm the board but stays within normal USB power limits.

What host port and cable do I need to reach 4048x3024 at 30 FPS?

A USB 3.0 Type-C port and a USB 3.0 Type-C cable are required; USB 2.0 cannot deliver the bandwidth for 30 FPS at 12 MP.

Will the 79.4° field of view match the lens on my older 1/3-inch camera board?

The 1/2.3-inch IMX378 sensor gives a wider 79.4° diagonal view than typical 1/3-inch modules, so the scene coverage will be noticeably broader.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.