Weiler
Weiler 13081 4 in Crimped Wire Wheel Brush 5/8-11 Threaded Arbor 20,000 RPM
Crimped carbon-steel wire wheel brush with a 5/8-11 threaded arbor for angle grinders up to 20,000 RPM
- TypeSanders
- 4 in diameter fits tight work areas
- Crimped carbon-steel wire removes rust and paint
- 5/8-11 threaded arbor mounts directly on angle grinders
- Rated 20,000 RPM for high-speed cleaning
- 014 in bristle diameter balances aggression and surface protection
4-Inch Crimped Wire Wheel Brush
The Weiler 13081 is a 4-inch crimped wire wheel brush designed for use on angle grinders. It features carbon steel bristles with a 0.014-inch diameter and a 1/2-inch face width. The brush mounts via a 5/8-11 threaded arbor for direct attachment to compatible tools.
Surface Preparation on Carbon Steel
This brush suits metalworkers cleaning welds, removing rust, or deburring edges on carbon steel workpieces. The crimped wire configuration provides flexible brushing action that conforms to irregular surfaces. It is not intended for heavy stock removal or for use on non-ferrous metals where contamination must be avoided.
20,000 RPM Maximum Operating Speed
The brush carries a maximum safe operating speed of 20,000 RPM. The angle grinder used must not exceed this limit, or the brush can disintegrate and cause injury. Always verify the tool's no-load speed before mounting this accessory.
Highlights
- 4 in diameter fits tight work areas
- Crimped carbon-steel wire removes rust and paint
- 5/8-11 threaded arbor mounts directly on angle grinders
- Rated 20,000 RPM for high-speed cleaning
- 014 in bristle diameter balances aggression and surface protection
Specifications
| Type | Sanders |
|---|---|
| Brand | Weiler |
| Model | 13081 |
Questions about this item
Will the 5/8-11 threaded arbor fit the angle grinder I already own?
The brush uses a 5/8-11 threaded hole, which matches the standard spindle on most angle grinders sold in North America. Check your tool's manual to confirm the arbor size before mounting.
How can I confirm the 4 inch crimped wire wheel is running safely at speed?
With the grinder off, spin the brush by hand to check for wobble or loose bristles. When running, the wheel should operate smoothly without excessive vibration up to the 20,000 RPM maximum rating.
Does the 13081 wire wheel come with any mounting hardware or adapters?
The brush is supplied as the wheel only with its integral 5/8-11 threaded arbor. No extra flanges, nuts or adapters are included; your angle grinder's existing spindle nut secures the brush.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
