Weigh Gram Digital Milligram Scale 50g/0.001g 20g Calibration FN-50
A compact digital scale weighs up to 50 g in 0.001 g steps and includes a 20 g calibration weight
- Container Size0.2 g x 50 g x 0.001 g
- Item Count12 pack
- MaterialNitrile
- Measurement Range50 grams
- SpeedBacklit Display
- Capacity50g / 0.001
- Precision 0.001 g readability up to 50 g capacity
- 6 weighing modes cover g, oz, ozt, dwt, ct, gn
- Built-in 20 g weight enables on-the-spot calibration
- Backlit LCD with low-battery, overload and stability alerts
- Pocket-size 2.95 in × 5.39 in × 0.59 in with protective flip cover
Digital Milligram Scale for Laboratory Use
The Weigh Gram FN-50 is a digital milligram scale with a 50 g capacity and 0.001 g readability. It offers six weighing modes including grams, ounces, troy ounces, pennyweights, carats and grains. A backlit LCD screen and flip cover protect the sensor during transport and storage.
Suits Jewellers and Hobbyists Weighing Small Items
This scale suits users who need portable, high-resolution weighing for gold, silver, coins, gems or fine powders. The included 20 g calibration weight allows on-site recalibration. Buyers who need a higher maximum capacity or a larger weighing platform should look at something else.
Simple Setup with Automatic Power Saving
Install the two supplied zinc-chloride batteries, remove the insulation sheet and replace the cover. Press the MODE key for three seconds to enter calibration mode and apply the 20 g weight when prompted. The display auto-off activates after 180 seconds of inactivity to conserve power.
Highlights
- Precision 0.001 g readability up to 50 g capacity
- 6 weighing modes cover g, oz, ozt, dwt, ct, gn
- Built-in 20 g weight enables on-the-spot calibration
- Backlit LCD with low-battery, overload and stability alerts
- Pocket-size 2.95 in × 5.39 in × 0.59 in with protective flip cover
Specifications
| Container Size | 0.2 g x 50 g x 0.001 g |
|---|---|
| Item Count | 12 pack |
| Material | Nitrile |
| Measurement Range | 50 grams |
| Speed | Backlit Display |
| Capacity | 50g / 0.001 |
| Brand | Weigh Gram |
| Movement Type | true |
| Color/Finish | Black |
| Power Requirement | zinc_chloride, true |
| Part Number | FN-50 |
Questions about this item
What power source must I have ready before using the FN-50 scale?
The scale ships with two zinc-chloride batteries; remove the insulation sheet from the battery compartment and fit the cover before first use.
Will the flip cover protect the weighing pan if I keep the scale in a toolbox with heavier items?
The ABS flip cover shields the pan and sensors from bumps and rubs, but the compact 2.95 in × 5.39 in × 0.59 in body can still shift under heavy tools.
How do I confirm the scale is calibrated correctly after setup?
Turn the scale on, wait for the LCD to show 0.0 or 0.000, hold MODE for three seconds until CAL appears, press MODE again, then place the included 20 g weight on the centre of the pan and verify the display locks on the calibration value.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
