We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White RAM cooler pair with 10 ARGB LEDs, 500 mm cables, 135x50x9 mm each

weastlinks

weastlinks RA-2 laptop cooling pad white 2 fans 10 ARGB LEDs 5V 0.21A 3-pin 4-pin 500mm wire 135x50x9mm

SKU CH-2CY7-T43YD MPN RA-2.

A white ARGB memory cooler with two fans, ten addressable LEDs and a 500 mm cable for 5 V motherboard headers

  • Accessory TypeCooler
  • ColorWhite
  • Fan Numbers2
  • ARGB lighting with 10 addressable LEDs
  • 5 V DC power draws only 0.21 A
  • Dual 3-pin plus single 4-pin connectors
  • 500 mm cable reaches most motherboard headers
  • Compact 135 × 50 × 9 mm aluminium heatsink

ARGB Memory Cooler with Dual Connectors

The Weastlinks RA-2 is a memory heat-sink cooler designed for desktop RAM modules. It fits high, medium and low-profile sticks with single or double-sided chips. Two 5 V ARGB fans and ten addressable LEDs provide synchronised lighting through a standard 3-pin header. The 500 mm cable allows flexible routing inside the case.

Suited for Builders Adding Lighting to RAM

This cooler suits enthusiasts who want ARGB illumination on memory without a liquid loop. It works with bare modules and standard motherboard 5 V ARGB control. Buyers who need active airflow directed at VRMs or chipset areas should look at dedicated board coolers. Systems lacking a 5 V 3-pin ARGB header cannot use the lighting functions.

5 V 3-Pin ARGB Interface Decides Compatibility

The single specification that determines fit is the 5 V 3-pin ARGB connector on the motherboard. Without this header the cooler installs mechanically but the ten LEDs remain dark. The 500 mm lead reaches most ATX and micro-ATX layouts. Verify the header exists before purchase.

Highlights

  • ARGB lighting with 10 addressable LEDs
  • 5 V DC power draws only 0.21 A
  • Dual 3-pin plus single 4-pin connectors
  • 500 mm cable reaches most motherboard headers
  • Compact 135 × 50 × 9 mm aluminium heatsink

Specifications

Accessory TypeCooler
ColorWhite
Fan Numbers2

Questions about this item

What are the exact dimensions of the RA-2 cooler so I can confirm clearance above my memory slots?

The cooler measures 135 mm long, 50 mm wide and 9 mm thick, so check that your case and CPU cooler leave at least that much space above the DIMMs.

How do I attach the RA-2 to my memory modules and which step is most often missed?

Clip the cooler onto the top edge of each stick; the step people miss is seating both retention clips fully so the thermal pads make even contact across all 10 ARGB LEDs.

What upkeep will the RA-2 need over time?

Dust the two fans and light guide bar periodically with compressed air; the 500 mm leads and 3-pin/4-pin connectors are fixed, so any cable damage means replacing the whole unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.