We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray aluminium M.2 SSD heatsink with 38 fins

weastlinks

weastlinks M.2 SSD Heatsink Gray 38 Fins laptop cooling pad

SKU CH-A17D-C0EQS

Passive aluminium heatsink with 38 fins fits NVME and SATA M.2 SSDs, adding 23 mm width and 20 mm height while cutting drive temperatures by 10-40 °C

  • Accessory TypeCooler
  • ColorGray
  • Fan NumbersNo
  • Supports NVME and SATA M.2 SSDs with dual-protocol compatibility
  • 38 large fins expand heat-dissipation surface for passive cooling
  • One-piece CNC aluminium alloy body with 237 W/mK thermal conductivity
  • Two high-conductivity thermal pads included for gap-free SSD contact
  • Low 23 mm width and 20 mm height profile avoids CPU or GPU clearance issues

M.2 SSD heatsink with 38 fins

The weastlinks passive cooler fits NVME and SATA M.2 drives in laptops or desktops. CNC-machined aluminium alloy provides 237 W/mK thermal conductivity. Two high-conductivity thermal pads fill gaps between the drive and the heatsink base. Screw-fixed frame secures the assembly without damaging the SSD.

Passive cooling performance and clearance

38 large fins increase surface area 65 times over a bare drive. Supplier testing shows temperature reductions of 10 to 40 degrees Celsius depending on environment. Installed height is about 20 mm and width 23 mm, leaving room for most CPU coolers and graphics cards. No fan means silent operation and zero power draw.

Build quality and everyday installation

One-piece CNC moulding eliminates seams for consistent heat transfer. Grey anodised finish resists corrosion. Thermal pads cover both SSD sides and controller chips. Screw mounting keeps pressure even across the drive. Check motherboard spacing before purchase; the 23 mm width may conflict with tight layouts.

Highlights

  • Supports NVME and SATA M.2 SSDs with dual-protocol compatibility
  • 38 large fins expand heat-dissipation surface for passive cooling
  • One-piece CNC aluminium alloy body with 237 W/mK thermal conductivity
  • Two high-conductivity thermal pads included for gap-free SSD contact
  • Low 23 mm width and 20 mm height profile avoids CPU or GPU clearance issues

Specifications

Accessory TypeCooler
ColorGray
Fan NumbersNo

Questions about this item

How is the heatsink mounted and which step is often missed?

The screw-fixed frame clamps onto the M.2 SSD; the two included thermal pads must be placed on both the controller and the flash chips before tightening, otherwise contact is incomplete.

What maintenance or replacement will this cooler need over time?

The thermal pads may dry out or lose compliance after extended use; replacing them restores the original contact pressure and heat path.

What limit appears first during sustained heavy writes?

The 38-fin aluminium body relies on passive convection, so thermal saturation of the fin array becomes the bottleneck before the 237 W/mK material itself limits performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.