weastlinks
weastlinks M.2 NVME to Mini SAS SFF-8087 4 Port SATA3.0 6Gbps Hard Drive Adapter
Converts an M.2 NVME M-Key slot into four SATA 6 Gbps ports via a Mini SAS SFF-8087 connection using an ASMedia ASM1064 controller
- Changer TypeM.2 SATA
- Connects NVME drive to four SATA ports via Mini SAS SFF-8087
- SATA 3.0 interface delivers 6.0 Gbps transfer speed per port
- ASMedia ASM1064 controller manages four independent SATA 3.0 channels
- M-Key NVME slot accepts PCI-E protocol drives directly
- Includes heatsink for thermal management during sustained operation
M.2 NVME to 4-port SATA adapter
This expansion card converts an M-key NVME slot into four SATA3.0 ports using a Mini SAS SFF-8087 interface. It suits builders who want to add multiple hard drives or SSDs to a system with a spare M.2 connector. The ASMedia ASM1064 controller manages the protocol translation.
Sustained 6.0 Gbps throughput
Under continuous load the card maintains the Serial ATA 3.0 rate of 6.0 Gbps across all four ports. The onboard heatsink helps the controller maintain stable operation during long transfers. PCI-E protocol compliance ensures consistent signalling without throttling.
M-key slot and cable routing
Installation requires an M.2 M-key slot and a 70 cm Mini SAS to 4×SATA cable. The 36-pin SFF-8087 connector is keyed to prevent misalignment. Note that SAS hard drives are not supported, so only SATA devices should be attached.
Highlights
- Connects NVME drive to four SATA ports via Mini SAS SFF-8087
- SATA 3.0 interface delivers 6.0 Gbps transfer speed per port
- ASMedia ASM1064 controller manages four independent SATA 3.0 channels
- M-Key NVME slot accepts PCI-E protocol drives directly
- Includes heatsink for thermal management during sustained operation
Specifications
| Changer Type | M.2 SATA |
|---|
Questions about this item
How much heat does the ASMedia ASM1064 controller generate when the adapter runs all day?
The board includes a heatsink to dissipate heat from the ASMedia ASM1064 controller during continuous operation.
Which M.2 slot key and PCIe lane count does my motherboard need for this adapter?
The adapter requires an M.2 M-Key slot with PCIe lanes to carry the NVME protocol to the ASM1064 bridge.
Will my existing SATA 3.0 drives work at full 6.0 Gbps speed through the Mini SAS SFF-8087 ports?
Yes, the SFF-8087 interface breaks out to four SATA 3.0 ports each running at 6.0 Gbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



