We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black anodized magnesium-aluminum heatsink with 20 bottom air holes and thermal pad

weastlinks

weastlinks Cooler II M.2 2280 SSD Heatsink

SKU CH-KTGC-PJPTN

Passive magnesium-aluminium heatsink with 20 air holes lowers M.2 2280 SSD temperatures by 10-30 °C

  • Accessory TypeCooler
  • ColorBlack
  • Fan NumbersNo
  • Lowers drive temperature by 10-30 °C to prevent throttling
  • Magnesium-aluminium alloy body with 237 W/mK conductivity spreads heat fast
  • Anodised finish adds corrosion resistance and static protection
  • 20 bottom air holes increase dissipation surface area
  • Fits M.2 2280 SSDs including Samsung 860, 960, 970, 980 series

Compact M.2 2280 SSD heatsink for desktop builders

The weastlinks Cooler II fits M.2 2280 NVME drives such as Samsung 860, 960, 970 and 980 series. It mounts directly on the module without a fan, using a magnesium-aluminum alloy body with an anodised finish and a silver-plated surface that helps eliminate static electricity. A thermal silicone pad transfers heat from the controller and NAND to the heatsink. Twenty bottom air holes and striped fins increase the dissipation area.

Passive cooling under sustained write loads

Without active airflow the heatsink relies on its 237 W/mK thermal conductivity and enlarged surface area to absorb prolonged thermal energy. The supplier rates the cooling effect at 10 to 30 degrees Celsius depending on case airflow and ambient conditions. This passive approach prevents throttling during long file transfers or heavy workloads where a burst cooler would saturate. No moving parts means zero wear over time.

Silent operation with minimal power impact

The unit adds no fan noise and draws no electricity, keeping the system acoustics unchanged. Its 75 by 22.7 by 15 millimetre footprint fits tight motherboard layouts while the anodised magnesium-aluminum construction resists corrosion and maintains hardness. Builders who need active forced-air cooling or liquid-loop integration should look elsewhere, as this cooler is purely conductive and convective.

Highlights

  • Lowers drive temperature by 10-30 °C to prevent throttling
  • Magnesium-aluminium alloy body with 237 W/mK conductivity spreads heat fast
  • Anodised finish adds corrosion resistance and static protection
  • 20 bottom air holes increase dissipation surface area
  • Fits M.2 2280 SSDs including Samsung 860, 960, 970, 980 series

Specifications

Accessory TypeCooler
ColorBlack
Fan NumbersNo

Questions about this item

How much can the magnesium-aluminium alloy heatsink lower the temperature of an M.2 2280 SSD during all-day use?

The cooler delivers a temperature drop of 10–30 °C depending on airflow and ambient conditions, keeping the drive within safe limits and preventing thermal throttling.

Does the heatsink require a motherboard fan header or any extra mounting hardware to install?

No fan or powered connection is needed; the passive design uses 20 bottom air holes and an anodised aluminium body rated at 237 W/m·K thermal conductivity, secured by the existing M.2 standoff.

Will the 75 mm × 22.7 mm × 15 mm cooler fit alongside a Samsung 970 EVO or 980 Pro without blocking adjacent slots?

The compact single-sided profile matches the 2280 form factor and clears neighbouring components on most desktop boards, providing direct contact cooling for listed Samsung models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.