weastlinks
weastlinks 4 Copper Heat Pipe 120 mm ARGB CPU Cooler 125W TDP
Cools CPUs up to 125 W with four copper heat pipes, a 120 mm hydraulic-bearing fan at 800–1700 RPM, 65 CFM airflow and 5 V ARGB lighting
- Accessory TypeCooler
- ColorBlack
- Fan Numbers1
- Fan Size120 mm Fan
- Cool ARGB lighting synced to motherboard software
- Quiet operation down to 18 dBA at low speed
- Four copper heat pipes handle 125 W TDP
- Hydraulic bearing rated for 50000 hours life
- SATA fallback powers auto colour mode without 5V header
Target TDP and Socket Fit
This 125W TDP cooler mounts on Intel LGA115X and 1366 plus AMD AM4 platforms. It suits i3, i5 and i7 processors running at or below that thermal limit. Builders needing higher heat capacity or newer socket generations must look elsewhere.
Mounting and Lighting Hook-Up
The unit ships with 4-pin PWM, 3-pin ARGB and SATA power connectors. Hydraulic bearing fan installs with standard brackets; alignment is straightforward. If the motherboard lacks a 5V ARGB header, the SATA cable enables automatic colour cycling instead of software control.
Thermal Headroom and Acoustic Range
Rated airflow reaches 65 CFM at 1700 RPM while noise stays between 18 and 28.8 dBA. The four copper pipes and 120 mm fan handle sustained loads up to the 125W design point. Overclocked chips or prolonged heavy workloads beyond that envelope will exceed its cooling capacity.
Highlights
- Cool ARGB lighting synced to motherboard software
- Quiet operation down to 18 dBA at low speed
- Four copper heat pipes handle 125 W TDP
- Hydraulic bearing rated for 50000 hours life
- SATA fallback powers auto colour mode without 5V header
Specifications
| Accessory Type | Cooler |
|---|---|
| Color | Black |
| Fan Numbers | 1 |
| Fan Size | 120 mm Fan |
Questions about this item
How do I confirm the cooler is running at the correct speed after installation?
Use BIOS or monitoring software to verify the fan spins between 800 and 1700 RPM and noise stays within 18 to 28.8 dBA.
What comes in the box and which cables or brackets must I source separately?
The package includes only the 4 copper heat pipe cooler; mounting hardware for LGA115X, LGA1366 or AM4 and any additional fan cables are not supplied.
Which version of this cooler should I choose for a 125 W TDP processor?
This single 120 mm model with four heat pipes is rated for up to 125 W TDP and fits CPUs such as i3, i5 and i7 on supported sockets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



